Carte Convertion
INSA-GEI·insa-gei·hardware/Helicoptere_INSA_150/pcb/Carte_Convertion/Carte_Convertion.kicad_pcb
About the Carte Convertion PCB
Carte Convertion is an open source STM32 PCB design by INSA-GEI, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 87.9 × 27.1 mm, with 12 components from 6 distinct parts.
Its main chip is the STM32L031, from the STM32 family. Other key parts include the MIC4427. By type, the board carries 7 resistors, 2 ICs, 2 diodes and 1 capacitor.
From the project
INSA-GEI top level repository
Main components on the Carte Convertion
Carte Convertion bill of materials (BOM)
12 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32L031 | STM32-Nucleo-32 | U1 |
| 1 | MIC4427 | DIP-8_W7.62mm_LongPads | U2 |
| 1 | D_Zener | D_SOD-123 | D1 |
| 1 | LED | LED_D5.0mm | D2 |
| 1 | CP | CP_Axial_L10.0mm_D4.5mm_P15.00mm_Horizontal | C1 |
| 7 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R10, R11 |
Carte Convertion design files
The KiCad project lives in the INSA-GEI/insa-gei repository on GitHub; these links point at the commit this page was built from.
Carte Convertion: common questions
What microcontroller does the Carte Convertion use?
The Carte Convertion is built around the STM32L031, from the STM32 family.
How big is the Carte Convertion PCB?
The Carte Convertion measures 87.9 × 27.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Carte Convertion?
12 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Carte Convertion design files?
From the INSA-GEI/insa-gei repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Carte Convertion design in my own project?
Yes, under the terms of its GPL-3.0 license, which INSA-GEI chose for the repository.
Can I test firmware for the Carte Convertion without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in insa-gei
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k