Ede
intible·ede
About the Ede PCB
Ede is an open source PCB design by intible, published on GitHub under the CC-BY-SA-4.0 license. It is a 4-layer board measuring 72.1 × 49 mm, with 86 components from 20 distinct parts.
Other key parts include the NCS20034DR2G and U3216. By type, the board carries 28 resistors, 21 capacitors, 6 transistors, 4 ICs, 3 connectors and 3 diodes.
It belongs with the robotics & motion designs in this gallery.
From the project
KiCad adaptation of EasyDIY-ESC
Note: 'main' branch is under development, there is a change to use KiCad as compared to v0.5.2 (current HEAD of feature/v052, i.e. git SHA1 - e55e314)
The target for this EV motor controller is to power small EVs like EBikes or EScooters like Xiaomi M365, and offer better customizability and repairability.
Easy to build and repair DIY**: It uses DC-DC modules, a development board instead of an uC chip, SMD passive components are all 0805 or bigger, and ICs are SOIC8 or SOIC14. No fine pitch components.
Main components on the Ede
Ede bill of materials (BOM)
86 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NCS20034DR2G | SOIC-14_3.9x8.7mm_P1.27mm_EDE | U2 |
| 3 | U3216 | SOIC-8_3.9x4.9mm_P1.27mm_EDE | U5, U6, U7 |
| 6 | MDP10N027 | TO-220-3_Vertical_EDE | Q1, Q2, Q3, Q4, Q5, Q6 |
| 1 | Conn_01x06 | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical_EDE | J5 |
| 2 | Conn_01x04 | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical_EDE | J7, J8 |
| 2 | SolderJumper_2_Open | SolderJumper-2_small_EDE | JP1, JP2 |
| 6 | 4.7 | R_0805_2012Metric_small_EDE | RG1, RG2, RG3, RG4, RG5, RG6 |
| 3 | 0.001 | R_2512_6332Metric_EDE | SH1, SH2, SH3 |
| 1 | 680u | CP_Radial_D12.5mm_P5.00mm_EDE | XC0 |
| 3 | 100u | CP_Radial_D8.0mm_P3.50mm_EDE | XC1, XC2, XC3 |
| 6 | 2.2u | C_1206_3216Metric_EDE | XC4, XC5, XC6, XC7, XC8, XC9 |
| 3 | SM4007PL | D_SOD-123_EDE | D1, D2, D3 |
| 14 | 10u | C_0805_2012Metric_EDE | C1, C2, C3, C4, C7, C8, C9, C11 +6 |
| 7 | 100n | C_0805_2012Metric_EDE | C5, C6, C10, C19, C20, C21, C22 |
| 1 | 1M | R_0805_2012Metric_small_EDE | R1 |
| 1 | 33K | R_0805_2012Metric_small_EDE | R2 |
| 12 | 2.2K | R_0805_2012Metric_EDE | R3, R5, R14, R19, R20, R21, R22, R23 +4 |
| 2 | 10K | R_0805_2012Metric_small_EDE | R4, R25 |
| 6 | 100 | R_0805_2012Metric_small_EDE | R6, R8, R9, R10, R11, R13 |
| 6 | 22K | R_0805_2012Metric_small_EDE | R7, R12, R15, R16, R17, R18 |
Ede design files
The KiCad project lives in the intible/ede repository on GitHub; these links point at the commit this page was built from.
- Layoutede.kicad_pcb
- Schematicede.kicad_sch
Ede: common questions
How big is the Ede PCB?
The Ede measures 72.1 × 49 mm, has 4 copper layers and is 4.69 mm thick.
How many components are on the Ede?
86 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ede design files?
From the intible/ede repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Ede design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which intible chose for the repository.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979