Remote Board L476RG
About the Remote Board L476RG
Remote Board L476RG is an open source PCB design by IOGS-LEnsE-platforms, published on GitHub. It is a 2-layer board measuring 199 × 123 mm, with 44 components from 25 distinct parts.
Other key parts include the MCP23008-xP. By type, the board carries 14 resistors, 11 connectors, 7 diodes, 5 switches, 5 capacitors and 1 IC.
Main components on the Remote Board L476RG
Remote Board L476RG bill of materials (BOM)
44 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP23008-xP | DIP-18_W7.62mm | U1 |
| 1 | MikroE-nRF-S-module | MIKROBUS_MODULE_CONN | CON1 |
| 1 | LCD_SD | PinSocket_1x11_P2.54mm_Horizontal | J1 |
| 1 | JoyStick | PinSocket_1x05_P2.54mm_Horizontal | J2 |
| 1 | AnalogIn | PinSocket_1x02_P2.54mm_Horizontal | J3 |
| 1 | BAT_IN | TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J4 |
| 1 | Morpho_Gauche | PinHeader_2x20_P2.54mm_Vertical | J5 |
| 1 | Morpho_Droite | PinHeader_2x20_P2.54mm_Vertical | J6 |
| 1 | I2C_Visu | PinSocket_1x03_P2.54mm_Vertical | J7 |
| 1 | I2C_EXT | PinSocket_1x04_P2.54mm_Horizontal | J8 |
| 1 | GND_reg | PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | 3.3V_reg | PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | R_Potentiometer | Potentiometer_Vishay_T73YP_Vertical | RV1 |
| 1 | SW_1 | Switch | SW1 |
| 1 | SW_2 | Switch | SW2 |
| 1 | SW_3 | Switch | SW3 |
| 1 | SW_4 | Switch | SW4 |
| 1 | SW_5 | Switch | SW5 |
| 2 | D | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 5 | LED | LED_D3.0mm_Clear | D3, D4, D5, D6, D7 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 10nF | C_Rect_L7.0mm_W3.5mm_P5.00mm | C2, C3, C4, C5, C6 |
| 6 | 8.2k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3, R5, R6, R7, R16 |
| 1 | 1.2k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 2 | 680 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8, R9 |
| 5 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11, R12, R13, R14, R15 |
Remote Board L476RG design files
The KiCad project lives in the IOGS-LEnsE-platforms/labworks repository on GitHub; these links point at the commit this page was built from.
Remote Board L476RG: common questions
How big is the Remote Board L476RG?
The Remote Board L476RG measures 199 × 123 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Remote Board L476RG?
44 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Remote Board L476RG design files?
From the IOGS-LEnsE-platforms/labworks repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Remote Board L476RG design in my own project?
The repository has no license, so all rights stay with IOGS-LEnsE-platforms. Use it as a reference, and ask the author before reusing the design.
More boards in labworks
CarteDMX512vF767
109.9 × 134.6 mm79 parts2LNo license0
Asst slave d25
91.4 × 91.4 mm35 parts2LNo license0
AM modulation fiber
88.9 × 66.6 mm32 parts2LNo license0
Regul Temp L432KC
88.9 × 70.1 mm28 parts2LNo license0
Main board
63 × 80.5 mm27 parts2LNo license0
Carte alim signauxv2
216.5 × 68.6 mm19 parts2LNo license0
FIR filter G431KB
88.9 × 59.7 mm17 parts2LNo license0
Carte PhotodectionSimple
98.4 × 107.3 mm16 parts2LNo license0
Phd slave
91.4 × 91.4 mm16 parts2LNo license0
Carte LED Photodiode carac
59.6 × 61.4 mm11 parts2LNo license0
CMS AmpliGBP
49.1 × 39.9 mm7 parts2LNo license0