Regul Temp L432KC
About the Regul Temp L432KC PCB
Regul Temp L432KC is an open source PCB design by IOGS-LEnsE-platforms, published on GitHub. It is a 2-layer board measuring 88.9 × 70.1 mm, with 28 components from 22 distinct parts.
Other key parts include the LM358 and NUCLEO-L432KC. By type, the board carries 13 connectors, 10 resistors, 2 ICs, 1 transistor and 1 capacitor.
Main components on the Regul Temp L432KC
Regul Temp L432KC bill of materials (BOM)
28 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM358 | DIP-8_W7.62mm_LongPads | U1 |
| 1 | NUCLEO-L432KC | MODULE_NUCLEO-L432KC | U2 |
| 1 | IRL540N | TO-220-3_Vertical | Q1 |
| 1 | TRIM_CONSIGNE | PinSocket_1x03_P2.54mm_Vertical | J1 |
| 1 | Temp_In | PinSocket_1x02_P2.54mm_Vertical | J2 |
| 1 | POWER_IN_5V | PinSocket_1x02_P2.54mm_Vertical | J3 |
| 1 | SW_MODE | PinSocket_1x03_P2.54mm_Vertical | J4 |
| 1 | OUT_to_BNC | PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | Consigne | PinSocket_1x02_P2.54mm_Vertical | J6 |
| 1 | Erreur | PinSocket_1x02_P2.54mm_Vertical | J7 |
| 1 | OLED | PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | POWER_MOTOR_6V | PinSocket_1x02_P2.54mm_Vertical | J9 |
| 1 | Digilent Motor | JST_PH_S6B-PH-K_1x06_P2.00mm_Horizontal | J11 |
| 1 | 2.54 motor | PinHeader_1x06_P2.54mm_Vertical | J12 |
| 1 | Consigne_In | PinSocket_1x02_P2.54mm_Vertical | J13 |
| 1 | SW_consigne | PinSocket_1x03_P2.54mm_Vertical | J14 |
| 1 | 100 | Potentiometer_Bourns_3386P_Vertical | RV1 |
| 1 | 10u | CP_Radial_D5.0mm_P2.50mm | C1 |
| 2 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 5 | 22k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4, R5, R6, R10 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 680 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R8 |
| 1 | 12k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9 |
Regul Temp L432KC design files
The KiCad project lives in the IOGS-LEnsE-platforms/labworks repository on GitHub; these links point at the commit this page was built from.
Regul Temp L432KC: common questions
How big is the Regul Temp L432KC PCB?
The Regul Temp L432KC measures 88.9 × 70.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Regul Temp L432KC?
28 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Regul Temp L432KC design files?
From the IOGS-LEnsE-platforms/labworks repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Regul Temp L432KC design in my own project?
The repository has no license, so all rights stay with IOGS-LEnsE-platforms. Use it as a reference, and ask the author before reusing the design.
More boards in labworks
CarteDMX512vF767
109.9 × 134.6 mm79 parts2LNo license0
Remote Board L476RG
199 × 123 mm44 parts2LNo license0
Asst slave d25
91.4 × 91.4 mm35 parts2LNo license0
AM modulation fiber
88.9 × 66.6 mm32 parts2LNo license0
Main board
63 × 80.5 mm27 parts2LNo license0
Carte alim signauxv2
216.5 × 68.6 mm19 parts2LNo license0
FIR filter G431KB
88.9 × 59.7 mm17 parts2LNo license0
Phd slave
91.4 × 91.4 mm16 parts2LNo license0
Carte PhotodectionSimple
98.4 × 107.3 mm16 parts2LNo license0
Carte LED Photodiode carac
59.6 × 61.4 mm11 parts2LNo license0
CMS AmpliGBP
49.1 × 39.9 mm7 parts2LNo license0