Cv lighting
iRobotics-Pacbot·Electrical·cv_lighting_pcb/cv_lighting_pcb.kicad_pcb
About the Cv lighting PCB
Cv lighting is an open source PCB design by iRobotics-Pacbot, published on GitHub. It is a 2-layer board measuring 83.8 × 61 mm, with 24 components from 9 distinct parts.
Other key parts include the Current Driver, C2883759 and C521452. By type, the board carries 16 diodes, 3 ICs, 2 capacitors, 1 transistor and 1 resistor.
From the project
Electrical Projects
Main components on the Cv lighting
Cv lighting bill of materials (BOM)
24 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Current Driver | 3021_Buckpuck | U1 |
| 1 | C2883759 Camera Input | PinSocket_1x02_P2.54mm_Vertical_SMD_Pin1Left | U2 |
| 1 | C521452 Barrel Jack | TENSILITY_54-00164 | U4 |
| 1 | MMBT3904 | MMBT3904 | Q2 |
| 1 | 35WR5KLFTR | 35WR5KLFTR | RV1 |
| 8 | LED | LED_SFH4715AS | D1, D2, D3, D4, D5, D6, D7, D8 |
| 8 | C1869322 D_TVS | D3V3M1U2S9-7 | D9, D10, D11, D12, D13, D14, D15, D17 |
| 2 | 0.1UF 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 1 | 5K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
Cv lighting design files
The KiCad project lives in the iRobotics-Pacbot/Electrical repository on GitHub; these links point at the commit this page was built from.
Cv lighting: common questions
How big is the Cv lighting PCB?
The Cv lighting measures 83.8 × 61 mm, has 2 copper layers and is 1.35532 mm thick.
How many components are on the Cv lighting?
24 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Cv lighting design files?
From the iRobotics-Pacbot/Electrical repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Cv lighting design in my own project?
The repository has no license, so all rights stay with iRobotics-Pacbot. Use it as a reference, and ask the author before reusing the design.