Pacboard2025
iRobotics-Pacbot·Electrical·pacboard2025/pacboard2025.kicad_pcb
About the Pacboard2025 PCB
Pacboard2025 is an open source PCB design by iRobotics-Pacbot, published on GitHub. It is a 4-layer board measuring 80 × 85 mm, with 30 components from 20 distinct parts.
Other key parts include the C538149, D24V50F5 and ProS3. By type, the board carries 5 capacitors, 5 resistors, 4 LEDs, 3 ICs, 3 test points and 1 connector.
From the project
Electrical Projects
Main components on the Pacboard2025
Pacboard2025 bill of materials (BOM)
30 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C538149 NMOS | IFX-PG-TSDSON-8-901-G-V | U1 |
| 1 | D24V50F5 | PinHeader_1x05_P2.54mm_Vertical | U2 |
| 1 | ProS3 | ProS3_TH (1) | U3 |
| 1 | XT30 Male Connector | AMASS_XT30U-M_1x02_P5.0mm_Vertical | J1 |
| 1 | Conn_01x06_Socket2 | PinHeader_1x06_P2.54mm_Vertical | INTR_TOF1 |
| 1 | ~ | SOT-23-5 | LP3470A1 |
| 2 | DRV8876 | DRV8876 | MC1, MC2 |
| 2 | CONN_01X06_PIN Conn_01x06_Pin | ZH1.5-6 | MOTOR1, MOTOR2 |
| 1 | TOF_STEMMA | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | STEMMA_QT1 |
| 1 | C2906762 VSUP_VCC | PinHeader_1x01_P2.54mm_Vertical | TP1 |
| 1 | C2906762 5V | PinHeader_1x01_P2.54mm_Vertical | TP2 |
| 1 | C2906762 GND | PinHeader_1x01_P2.54mm_Vertical | TP3 |
| 1 | Conn_01x06_Socket | PinHeader_1x06_P2.54mm_Vertical | XSHUT_TOF1 |
| 4 | Neopixel | Neopixels 5050 | LED1, LED2, LED3, LED4 |
| 1 | C413465 D | D_SMB | D2 |
| 5 | 0.1UF 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5 |
| 1 | 4.7K 4.7k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 500 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 15K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 2 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5 |
Pacboard2025 design files
The KiCad project lives in the iRobotics-Pacbot/Electrical repository on GitHub; these links point at the commit this page was built from.
Pacboard2025: common questions
How big is the Pacboard2025 PCB?
The Pacboard2025 measures 80 × 85 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Pacboard2025?
30 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pacboard2025 design files?
From the iRobotics-Pacbot/Electrical repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pacboard2025 design in my own project?
The repository has no license, so all rights stay with iRobotics-Pacbot. Use it as a reference, and ask the author before reusing the design.