Pacboard2025 alt
iRobotics-Pacbot·Electrical·pacboard2025_alt/pacboard2025_alt.kicad_pcb
About the Pacboard2025 alt PCB
Pacboard2025 alt is an open source PCB design by iRobotics-Pacbot, published on GitHub. It is a 4-layer board measuring 80 × 85 mm, with 32 components from 21 distinct parts.
Other key parts include the D24V50F5 and ProS3. By type, the board carries 6 resistors, 5 capacitors, 4 LEDs, 3 test points, 2 ICs and 1 transistor.
From the project
Electrical Projects
Main components on the Pacboard2025 alt
Pacboard2025 alt bill of materials (BOM)
32 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | D24V50F5 | PinHeader_1x05_P2.54mm_Vertical | U2 |
| 1 | ProS3 | ProS3_TH (1) | U3 |
| 1 | C2589 NMOS | SOT-23 | Q1 |
| 1 | XT30 Male Connector | AMASS_XT30U-M_1x02_P5.0mm_Vertical | J1 |
| 1 | Conn_01x06_Socket2 | PinHeader_1x06_P2.54mm_Vertical | INTR_TOF1 |
| 1 | ~ | SOT-23-5 | LP3470A1 |
| 2 | DRV8876 | DRV8876 | MC1, MC2 |
| 2 | CONN_01X06_PIN Conn_01x06_Pin | ZH1.5-6 | MOTOR1, MOTOR2 |
| 1 | J107F1CS1224VDC.36 | J107 | Relay1 |
| 1 | TOF_STEMMA | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | STEMMA_QT1 |
| 1 | C2906762 VSUP_VCC | PinHeader_1x01_P2.54mm_Vertical | TP1 |
| 1 | C2906762 5V | PinHeader_1x01_P2.54mm_Vertical | TP2 |
| 1 | C2906762 GND | PinHeader_1x01_P2.54mm_Vertical | TP3 |
| 1 | Conn_01x06_Socket | PinHeader_1x06_P2.54mm_Vertical | XSHUT_TOF1 |
| 4 | Neopixel | Neopixels 5050 | LED1, LED2, LED3, LED4 |
| 1 | C413465 D | D_SMB | D2 |
| 5 | 0.1UF 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5 |
| 1 | 4.7K 4.7k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 500 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 15K 15k | R_0805_2012Metric | R3 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 10K 10k | R_0805_2012Metric | R4, R5, R6 |
Pacboard2025 alt design files
The KiCad project lives in the iRobotics-Pacbot/Electrical repository on GitHub; these links point at the commit this page was built from.
Pacboard2025 alt: common questions
How big is the Pacboard2025 alt PCB?
The Pacboard2025 alt measures 80 × 85 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Pacboard2025 alt?
32 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pacboard2025 alt design files?
From the iRobotics-Pacbot/Electrical repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pacboard2025 alt design in my own project?
The repository has no license, so all rights stay with iRobotics-Pacbot. Use it as a reference, and ask the author before reusing the design.