IPC101
About the IPC101 PCB
IPC101 is an open source PCB design by IronPineOutdoors, published on GitHub. It is a 2-layer board measuring 150 × 100 mm, with 24 components from 21 distinct parts.
Other key parts include the TCA8418RTWR. By type, the board carries 4 connectors, 4 test points, 4 resistors, 3 switches, 2 capacitors and 1 IC.
It belongs with the displays & leds designs in this gallery.
From the project
Iron Pine IPC-101 — modular operator control-panel PCB for IPC-100-based products, providing physical controls, navigation, status indication, and display interfacing.
This directory contains the fabrication-oriented Rev C operator-control board for the Crosswind control-panel replacement.
- Board outline: 150 x 100 mm, matching the Rev C faceplate. - OLED: left-side 2.42-inch Hosyond/SSD1309 mechanical pattern. The display mounts to the faceplate and plugs into IPC-101 J2; J4 carries the same isolated five-wire branch to IPC-100 J6 (OLEDVCC, GND, SDA, SCL, RESET`). - Navigation: Adafruit 504 five-way switch at the right side of the display row. - Lower controls: ARM at left and PULL at right. - Indicator: PCB-mounted 5 mm common-anode RGB LED centered…
Main components on the IPC101
IPC101 bill of materials (BOM)
24 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TCA8418RTWR Texas Instruments | U1 | |
| 1 | C189895 IPC-100 J10 JST | J1 | |
| 1 | VERIFY_AT_PO OLED HARNESS OUTPUT JST | J2 | |
| 1 | VERIFY_AT_PO IPC-100 J8A STOP Phoenix Contact | J3 | |
| 1 | VERIFY_AT_PO IPC-100 J6 OLED INPUT JST | J4 | |
| 1 | B0G2RFLG1L HOSYOND 2.42in SSD1309 - 5 WIRE J6 HARNESS Hosyond | DS1 | |
| 4 | APPLICATION_SPECIFIC Generic | H1, H2, H3, H4 | |
| 1 | B3F-4055 ARM B3F-4055 Omron/Aratas | SW1 | |
| 1 | B3F-4055 PULL B3F-4055 Omron/Aratas | SW2 | |
| 1 | 504 ADAFRUIT 504 - VERIFY PIN MAP Adafruit | SW3 | |
| 1 | 5015 +3V3 Keystone | TP1 | |
| 1 | 5015 GND Keystone | TP2 | |
| 1 | 5015 SDA Keystone | TP3 | |
| 1 | 5015 SCL Keystone | TP4 | |
| 1 | VERIFY_LEAD_ORDER 5MM RGB COMMON ANODE Generic | D1 | |
| 1 | C2012X7R1H104K125AA 100nF TDK | C1 | |
| 1 | C2012X5R1A475K125AB 4.7uF TDK | C2 | |
| 1 | ERJ-6ENF1002V 10k RESET Panasonic | R1 | |
| 1 | 0805W8F1001T5E 1k RED UNI-ROYAL | R2 | |
| 1 | 0805W8F1001T5E 1k GREEN UNI-ROYAL | R3 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0805W8F1001T5E 1k BLUE UNI-ROYAL | R4 |
IPC101 design files
The KiCad project lives in the IronPineOutdoors/IPC101 repository on GitHub; these links point at the commit this page was built from.
IPC101: common questions
How big is the IPC101 PCB?
The IPC101 measures 150 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the IPC101?
24 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the IPC101 design files?
From the IronPineOutdoors/IPC101 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the IPC101 design in my own project?
The repository has no license, so all rights stay with IronPineOutdoors. Use it as a reference, and ask the author before reusing the design.
Similar boards
LevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k