14 open source boards using the TCA8418RTWR
Real designs built with the TCA8418RTWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
EinkPDA keyboard
TalismanDesign
95 × 55.5 mm128 parts4LApache-2.02.0kESP32
Communicator
Hack-a-Day
148 × 81 mm47 parts2LMIT105Sisu SSE-9
briskspirit
43.9 × 118.2 mm259 parts6LUnlicense18- schematic only · 6 partsESP8266
Epaper
junglejim8
6 partsNo license16 ESP32
Mesh-IT
Bored-guy-with-ADHD
150 × 113 mm87 parts4LMIT3ESP32
Messenger
nickzentmayer
68 × 73.5 mm89 parts4LNo license1Meshtastic xiao nrf phone
Slankydudl
44 × 69.1 mm30 parts4LNo license1STM32
Analog ai chip
vyquocvu
70 × 52 mm21 parts4LMIT1ESP32
Handset
JeremyLakeyJr
66 × 142 mm217 parts4LNo license0Comscicalc keys rev0
oskarvh
180 × 108 mm137 parts2LNo license0ESP32
Communicator
MattSzymonski
148 × 81 mm47 parts2LNo license0ESP32
Communicator
hexan86
148 × 81 mm47 parts2LMIT0ESP32
Communicator
grinchdubs
148 × 81 mm47 parts2LNo license0IPC101
IronPineOutdoors
150 × 100 mm24 parts2LNo license0
How designs wire the TCA8418RTWR
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the TCA8418RTWR connects to, and the resistors, capacitors and other passives placed on it.
- The RESET pin has a pull-up to 3.3V on 11 of 12 designs, most often 10 kΩ (then 100 kΩ).
- The SDA pin has a pull-up to 3.3V on 11 of 12 designs, most often 5.1 kΩ (then 4.7 kΩ).
- The SCL pin has a pull-up to 3.3V on 11 of 12 designs, most often 5.1 kΩ (then 4.7 kΩ).
- The INT pin has a pull-up to 3.3V on 11 of 12 designs, most often 10 kΩ (then 5.1 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 19 | Connected to: GND 100% | — |
| RESETpin 20 | Connected to: The microcontroller 42% |
|
| VCCpin 21 | Connected to: 3.3V 92% |
|
| SDApin 22 | Connected to: The microcontroller 67%, a connector 25% |
|
| SCLpin 23 | Connected to: The microcontroller 67%, a connector 25% |
|
| INTpin 24 | Connected to: The microcontroller 67% |
|
| EPpin 25 | Connected to: GND 92% | — |
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include EinkPDA keyboard by TalismanDesign, Communicator pcb by Hack-a-Day, Sisu SSE-9 by briskspirit and Mesh-IT by Bored-guy-with-ADHD.
The TCA8418RTWR in open source designs
The gallery holds 14 open source boards using the TCA8418RTWR from 14 GitHub repositories; a typical one measures about 148 × 81 mm and carries around 47 components.
54% use four copper layers or more, and 43% carry an open source license.
The most starred is EinkPDA keyboard by TalismanDesign.
Parts used alongside the TCA8418RTWR
What boards using the TCA8418RTWR are built for
TCA8418RTWR: common questions
Where can I find a TCA8418RTWR reference design?
Each of the 14 boards on this page is a real design using the TCA8418RTWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the TCA8418RTWR RESET pin?
The RESET pin has a pull-up to 3.3V on 11 of 12 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 12 open source designs using the TCA8418RTWR.
What pull-up resistor is used on the TCA8418RTWR SDA pin?
The SDA pin has a pull-up to 3.3V on 11 of 12 designs, most often 5.1 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 12 open source designs using the TCA8418RTWR.
What pull-up resistor is used on the TCA8418RTWR SCL pin?
The SCL pin has a pull-up to 3.3V on 11 of 12 designs, most often 5.1 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 12 open source designs using the TCA8418RTWR.
What parts are used alongside the TCA8418RTWR?
The MCP73831-2-OT, AP2112K-3.3, ESP32-S3-WROOM-1, USBLC6-2SC6 and SN74AHCT125PWR appear in the most repositories here.
Which microcontrollers do boards using the TCA8418RTWR use?
Most are built on ESP32 (8), ESP8266 (1) and STM32 (1).
How big is a typical board using the TCA8418RTWR?
The median is 148 × 81 mm, and 46% are two-layer designs.
What is the most popular open source board using the TCA8418RTWR?
By GitHub stars, EinkPDA keyboard by TalismanDesign, with 2,025 stars.
Can I simulate one of these boards using the TCA8418RTWR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.