Stm32 audio class device

IsaacHo072·STM32-USB-Microphone-Interface·KiCad Files/STM32/stm32_audio_class_device.kicad_pcb

Stm32 audio class device PCB layout, top view — open source STM32 board by IsaacHo072

About the Stm32 audio class device PCB

Stm32 audio class device is an open source STM32 PCB design by IsaacHo072, published on GitHub. It is a 4-layer board measuring 71.1 × 50.8 mm, with 51 components from 26 distinct parts.

Its main chip is the STM32G431CBT6, from the STM32 family. Other key parts include the TPS7A0533PDBV. By type, the board carries 19 capacitors, 13 resistors, 10 connectors, 3 diodes, 2 ICs and 2 crystals.

It belongs with the audio designs in this gallery.

From the project

USB Audio Class Device with STM32G431CB and TLV320ADC6120

The PCB is working, but not fully verified since the I2C + I2S driver for TLV320ADC6120 haven't been written yet.

Some changes needed to be made to the STM32 board, for revision B: - Move all components to the top of the board, so it could be reflowed at once - Change the USB-C connector to a more popular and cheaper one - RST button have the wrong footprint, missing the positioning hole

Stm32 audio class device, from the project README
From the project README

Main components on the Stm32 audio class device

Stm32 audio class device bill of materials (BOM)

51 components, 26 distinct parts.

QtyPartRefs
1
STM32G431CBT6
U1
1
TPS7A0533PDBV
U2
1
Crystal_GND24
Y1
1
Crystal
Y2
1
E8124-015-01
Pulse Electronics Network
J1
1
Conn_ARM_JTAG_SWD_10
J2
2
Conn_01x03
J3, J6
3
Conn_01x10
J4, J5, J7
1
Conn_01x08
J8
1
Conn_01x05
J9
1
Conn_01x04
J10
1
5V, 500mA
F1
1
B3U-1000P
Omron Electronics Inc-EMC Div
S1
2
LED
D1, D2
1
USBLC6-2SC6
STMicroelectronics
D3
1
4.7uF
C1
4
1uF
C2, C7, C14, C16
2
30pF
C3, C5
1
10nF
C4
9
100nF
C6, C8, C10, C11, C13, C15, C17, C18 +1
Show 6 more
QtyPartRefs
2
20pF
C9, C12
2
0R
R1, R2
2
5.1k
R3, R4
3
10k
R5, R8, R9
2
2k
R6, R7
4
3.3k
R10, R11, R12, R13

Stm32 audio class device design files

The KiCad project lives in the IsaacHo072/STM32-USB-Microphone-Interface repository on GitHub; these links point at the commit this page was built from.

Stm32 audio class device: common questions

What microcontroller does the Stm32 audio class device use?

The Stm32 audio class device is built around the STM32G431CBT6, from the STM32 family.

How big is the Stm32 audio class device PCB?

The Stm32 audio class device measures 71.1 × 50.8 mm, has 4 copper layers and is 0.99 mm thick.

How many components are on the Stm32 audio class device?

51 components, from 26 distinct parts. The full bill of materials is listed on this page.

Where can I download the Stm32 audio class device design files?

From the IsaacHo072/STM32-USB-Microphone-Interface repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Stm32 audio class device design in my own project?

The repository has no license, so all rights stay with IsaacHo072. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Stm32 audio class device without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in STM32-USB-Microphone-Interface

Similar boards