10 open source boards using the TPS7A0533PDBV
Real designs built with the TPS7A0533PDBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Smart sensor battery pack
FeatureNAB
23 × 56 mm30 parts2LCC-BY-NC-4.0215STM32
Stm32 bluet pill
brendose
45.5 × 19.6 mm81 parts4LNo license1STM32
Stm32 audio class device
IsaacHo072
71.1 × 50.8 mm51 parts4LNo license1RP2040/RP2350
Smart watch
Paarth-Shirsat
40 × 40 mm109 parts4LNo license0Imu mouse hw
LassiHeikkila
50 × 81 mm63 parts4LNo license0STM32
43Design1
vt-aoe-nanosat-avionics
43 × 43 mm46 parts4LNo license0STM32
43Design2
vt-aoe-nanosat-avionics
43 × 43 mm46 parts4LNo license0STM32
Quasar Synthesizer Card
petrinm
71 × 61.4 mm130 parts4LCERN-OHL-W-2.06STM32
LED Redesign Design1
vt-aoe-nanosat-avionics
43 × 43 mm46 parts4LNo license0STM32
Quasar Debugger
petrinm
56.2 × 49 mm118 parts6LCERN-OHL-W-2.06
How designs wire the TPS7A0533PDBV
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TPS7A0533PDBV connects to, and the resistors, capacitors and other passives placed on it.
- The IN pin is tied to 5V on 6 of 7 designs.
- The OUT pin is tied to 3.3V on 5 of 7 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: 5V 86% | — |
| GNDpin 2 | Connected to: GND 100% | — |
| NCpin 4 | Connected to: Not connected 86% | — |
| OUTpin 5 | Connected to: 3.3V 71% · a signal 29% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Smart sensor battery pack by FeatureNAB, Quasar Debugger by petrinm, Stm32 bluet pill by brendose and Stm32 audio class device by IsaacHo072.
The TPS7A0533PDBV in open source designs
The gallery holds 10 open source boards using the TPS7A0533PDBV from 7 GitHub repositories; a typical one measures about 44.2 × 46 mm and carries around 57 components.
90% use four copper layers or more, and 20% carry an open source license.
The most starred is Smart sensor battery pack by FeatureNAB.
Microcontrollers on boards using the TPS7A0533PDBV
What boards using the TPS7A0533PDBV are built for
TPS7A0533PDBV: common questions
Where can I find a TPS7A0533PDBV reference design?
Each of the 10 boards on this page is a real design using the TPS7A0533PDBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS7A0533PDBV IN pin connected?
The IN pin is tied to 5V on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the TPS7A0533PDBV.
How is the TPS7A0533PDBV OUT pin connected?
The OUT pin is tied to 3.3V on 5 of 7 designs (a signal on 2). Counted from the KiCad layouts of 7 open source designs using the TPS7A0533PDBV.
Which microcontrollers do boards using the TPS7A0533PDBV use?
Most are built on STM32 (7) and RP2040/RP2350 (1).
How big is a typical board using the TPS7A0533PDBV?
The median is 44.2 × 46 mm, and 10% are two-layer designs.
What is the most popular open source board using the TPS7A0533PDBV?
By GitHub stars, Smart sensor battery pack by FeatureNAB, with 215 stars.
Can I simulate one of these boards using the TPS7A0533PDBV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.