Fc ee
IshraqueSarwar·CORESEN-custom-flight-computer·schematics/fc-ee/fc-ee.kicad_pcb
About the Fc ee PCB
Fc ee is an open source STM32 PCB design by IshraqueSarwar, published on GitHub. It is a 2-layer board measuring 46.5 × 31.2 mm, with 48 components from 20 distinct parts.
Its main chip is the STM32F407VETx, from the STM32 family. Other key parts include the MPU-9250, AMS1117-3.3 and AMS1117-5.0. By type, the board carries 22 capacitors, 10 resistors, 5 connectors, 4 ICs, 4 diodes and 1 crystal.
It belongs with the power & battery and sensors designs in this gallery.
From the project
Flight computer
A from-scratch, hand-soldered flight controller built to close the gap between writing embedded firmware and actually understanding the hardware it runs on.
CoreSen-V2, fully populated. LQFP-100 STM32F407VGT6, salvaged MPU-9250, hand-soldered in one four-hour session.
- Why This Board Exists - At a Glance - The Build Timelapse - System Architecture - Hardware Deep Dive - Microcontroller and Clocking - Power Tree - The IMU Problem: SPI vs I2C - USB and Programming - Decoupling Strategy - Peripheral and Pin Map - PCB Layout - Engineering Tradeoffs - Known Issues and V3 Roadmap - Bring-Up…

Main components on the Fc ee
Fc ee bill of materials (BOM)
48 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F407VETx | LQFP-100_14x14mm_P0.5mm | U1 |
| 1 | MPU-9250 | InvenSense_QFN-24_3x3mm_P0.4mm | U2 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | AMS1117-5.0 | SOT-223-3_TabPin2 | U4 |
| 1 | 8MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | USB_B_Micro | USB_Micro-B_Molex_47346-0001 | J1 |
| 3 | Conn_01x04_Pin | PinHeader_1x04_P2.00mm_Vertical | J2, J3, J4 |
| 1 | Conn_01x03_Pin | JST_NV_B03P-NV_1x03_P5.00mm_Vertical | J5 |
| 1 | SW_SPDT | SW_SPST_Panasonic_EVQPL_3PL_5PL_PT_A15 | SW1 |
| 3 | LED | LED_0201_0603Metric | D1, D2, D3 |
| 1 | BAT54C | SOT-23 | D5 |
| 1 | 120R | L_0603_1608Metric | FB1 |
| 10 | 100n | C_0402_1005Metric | C1, C2, C3, C4, C9, C11, C12, C14 +2 |
| 3 | 10n | C_0603_1608Metric | C5, C6, C10 |
| 3 | 1u | C_0402_1005Metric | C7, C8, C13 |
| 4 | 22u | C_0805_2012Metric | C15, C16, C19, C20 |
| 2 | 10p | C_0603_1608Metric | C21, C22 |
| 5 | 10k | R_0402_1005Metric | R1, R4, R5, R6, R7 |
| 2 | 22 | R_0402_1005Metric | R2, R3 |
| 3 | 1k | R_0402_1005Metric | R8, R9, R10 |
Fc ee design files
The KiCad project lives in the IshraqueSarwar/CORESEN-custom-flight-computer repository on GitHub; these links point at the commit this page was built from.
Fc ee: common questions
What microcontroller does the Fc ee use?
The Fc ee is built around the STM32F407VETx, from the STM32 family.
How big is the Fc ee PCB?
The Fc ee measures 46.5 × 31.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Fc ee?
48 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Fc ee design files?
From the IshraqueSarwar/CORESEN-custom-flight-computer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Fc ee design in my own project?
The repository has no license, so all rights stay with IshraqueSarwar. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Fc ee without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in CORESEN-custom-flight-computer
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k