20 open source boards using the STM32F407VETx
Real designs built with the STM32F407VETx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Kicker
SSL-A-Team
116 × 126 mm253 parts6LMIT6STM32
Maslab
maslab-5
99.1 × 99.1 mm317 parts4LNo license4STM32
USB-Keyboard
andreili
99.1 × 99.4 mm107 parts4LGPL-3.04STM32
IMU Ethernet
embeddedalpha
100 × 40 mm62 parts2LNo license2ESP32
LV PCB
luftaquila
293.1 × 125.3 mm159 parts2LNo license1STM32
STM32-FC
NARAE-INHA-UNIV
50 × 70 mm106 parts4LNo license1STM32
Payload V01
space-technologies-at-california
90.2 × 95.9 mm47 parts2LNo license1STM32
GrblHAL CNC
jaytektas
150 × 105 mm269 parts4LNo license0STM32
CCTV3 F407 REV200
aiex718
70 × 80 mm220 parts4LNo license0STM32
Hardware
NekoPurrTech
164.6 × 260.3 mm181 parts2LNo license0STM32
ChromaDeck
FBIopeningUPP
160 × 160.1 mm152 parts6LMIT0ESP32
Robot Main Controller V3
manhtienvu-vn
130.5 × 91.1 mm123 parts2LNo license0STM32
MM Control
giang-hoangnguyen
100 × 100 mm107 parts2LNo license0STM32
Corevus k
calithameridi
102.3 × 96.8 mm271 parts4LNo license25STM32
STM32H723 SDC Ver 1
manhtienvu-vn
93.2 × 65 mm57 parts2LNo license0STM32
Fc ee
IshraqueSarwar
46.5 × 31.2 mm48 parts2LNo license0ESP8266
DASHBOARD
luftaquila
225.1 × 97 mm56 parts2LNo license1STM32
Ethernet bob
coon42
59.2 × 66 mm64 parts2LGPL-3.01STM32
Stmw mcu stm32f407
STM32World
70 × 51.5 mm34 parts4LCustom license6
How designs wire the STM32F407VETx
Read from the KiCad layouts of 17 open source designs, one per repository: what each pin of the STM32F407VETx connects to, and the resistors, capacitors and other passives placed on it.
- The VCAP_1 pin has a capacitor to GND on 16 of 16 designs, most often 2.2 µF (then 100 nF).
- The VCAP_2 pin has a capacitor to GND on 16 of 16 designs, most often 2.2 µF (then 100 nF).
- The NRST pin has a capacitor to GND on 15 of 17 designs, most often 100 nF (then 10 µF).
- The VDD pins have a decoupling capacitor on 14 of 17 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBATpin 6 | Connected to: 3.3V 71% · not connected 18% |
|
| PC13pin 7 | Connected to: Not connected 65% · a signal 35% | — |
| VSSpin 10, 27, 74, 99 | Connected to: GND 97% | — |
| VDDpin 11, 19, 28, 50, 75, 100 | Connected to: 3.3V 97% |
|
| PH0pin 12 | Connected to: Signal 94% |
|
| PH1pin 13 | Connected to: Signal 88% |
|
| NRSTpin 14 | Connected to: A connector 35% |
|
| VSSApin 20 | Connected to: GND 94% | — |
| VREF+pin 21 | Connected to: 3.3V 76% · a signal 18% |
|
| VDDApin 22 | Connected to: 3.3V 82% |
|
| PC5pin 34 | Connected to: A connector 24% · not connected 18% |
|
| PB2pin 37 | Connected to: Signal 71% · not connected 29% |
|
| VCAP_1pin 49 | Connected to: Signal 100% |
|
| VCAP_2pin 73 | Connected to: Signal 100% |
|
| BOOT0pin 94 | Connected to: Signal 94% |
|
77 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LumenPnP Motherboard by opulo-inc, Corevus k by calithameridi, Kicker by SSL-A-Team and Stmw mcu stm32f407 by STM32World.
The STM32F407VETx in open source designs
The gallery holds 20 open source boards using the STM32F407VETx from 18 GitHub repositories; a typical one measures about 100 × 96.3 mm and carries around 115 components.
50% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is LumenPnP Motherboard by opulo-inc.
Parts used alongside the STM32F407VETx
What boards using the STM32F407VETx are built for
STM32F407VETx: common questions
Where can I find a STM32F407VETx reference design?
Each of the 20 boards on this page is a real design using the STM32F407VETx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the STM32F407VETx VCAP_1 pin connected?
The VCAP_1 pin has a capacitor to GND on 16 of 16 designs, most often 2.2 µF (then 100 nF). Counted from the KiCad layouts of 17 open source designs using the STM32F407VETx.
How is the STM32F407VETx VCAP_2 pin connected?
The VCAP_2 pin has a capacitor to GND on 16 of 16 designs, most often 2.2 µF (then 100 nF). Counted from the KiCad layouts of 17 open source designs using the STM32F407VETx.
How is the STM32F407VETx NRST pin connected?
The NRST pin has a capacitor to GND on 15 of 17 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 17 open source designs using the STM32F407VETx.
What parts are used alongside the STM32F407VETx?
The AMS1117-3.3, MAX3078E, SRV05-4 and USBLC6-2SC6 appear in the most repositories here.
Which microcontrollers do boards using the STM32F407VETx use?
Most are built on STM32 (17), ESP32 (2) and ESP8266 (1).
How big is a typical board using the STM32F407VETx?
The median is 100 × 96.3 mm, and 50% are two-layer designs.
What is the most popular open source board using the STM32F407VETx?
By GitHub stars, LumenPnP Motherboard by opulo-inc, with 3,655 stars.
Can I simulate one of these boards using the STM32F407VETx before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.