ZFireAlarm
its-villada·ZFireAlarm·Hardware/Xbee/Xbee.kicad_pcb
About the ZFireAlarm PCB
ZFireAlarm is an open source PCB design by its-villada, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 100 × 50 mm, with 44 components from 32 distinct parts.
Other key parts include the LM317, Xbee and LM358. By type, the board carries 13 resistors, 7 connectors, 7 diodes, 4 jumpers, 3 ICs and 3 transistors.
From the project
Sistema de sensores inalámbricos a ser distribuidos sobre el edificio de la institución educativa
Se utiliza una única placa con ambas funciones. Esquemático en Xbee.pdf
Main components on the ZFireAlarm
ZFireAlarm bill of materials (BOM)
44 components, 32 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM317 | TO-220-3_Vertical | U1 |
| 1 | Xbee | DIP2200W51P200L3294H279Q20P | U2 |
| 1 | LM358 | DIP-8_W7.62mm_Socket_LongPads | U3 |
| 3 | BC338 | TO-92_Inline | Q1, Q2, Q3 |
| 1 | Alimentación | TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | Raspberry | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | Pines 1 | PinSocket_1x10_P2.54mm_Vertical | J3 |
| 1 | Pines 2 | PinSocket_1x10_P2.54mm_Vertical | J4 |
| 1 | Programación | PinHeader_2x05_P2.54mm_Vertical | J5 |
| 1 | Entrada | TerminalBlock_bornier-2_P5.08mm | J6 |
| 1 | Salida | TerminalBlock_bornier-2_P5.08mm | J7 |
| 1 | Assoc-RSSI | PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | Loopback | PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 1 | DIO2 E/S | PinHeader_1x03_P2.54mm_Vertical | JP3 |
| 1 | Estado Batería | PinHeader_1x02_P2.54mm_Vertical | JP4 |
| 1 | Rele12V | Relay_SPDT_SANYOU_SRD_Series_Form_C | K1 |
| 2 | 10k | Potentiometer_Bourns_3386C_Horizontal | RV1, RV2 |
| 1 | Reset | SW_TH_Tactile_Omron_B3F-10xx | SW1 |
| 1 | Comm. | SW_TH_Tactile_Omron_B3F-10xx | SW2 |
| 1 | Assoc-RSSI | LED_D5.0mm | D1 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D2, D4 |
| 1 | Zener 5V | D_DO-35_SOD27_P10.16mm_Horizontal | D3 |
| 1 | LED ON | PinSocket_1x02_P2.54mm_Vertical | D5 |
| 1 | LED Batería | PinSocket_1x02_P2.54mm_Vertical | D6 |
| 1 | LED Salida | LED_D5.0mm | D7 |
| 2 | 1u | CP_Radial_D5.0mm_P2.50mm | C1, C2 |
| 2 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R3 |
| 1 | 68 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 3 | 560 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R11, R12 |
| 5 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R6, R8, R9, R10 |
| 1 | 3.3k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 1 | 680 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R13 |
ZFireAlarm design files
The KiCad project lives in the its-villada/ZFireAlarm repository on GitHub; these links point at the commit this page was built from.
ZFireAlarm: common questions
How big is the ZFireAlarm PCB?
The ZFireAlarm measures 100 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ZFireAlarm?
44 components, from 32 distinct parts. The full bill of materials is listed on this page.
Where can I download the ZFireAlarm design files?
From the its-villada/ZFireAlarm repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the ZFireAlarm design in my own project?
Yes, under the terms of its GPL-3.0 license, which its-villada chose for the repository.