HardLabs

Esp32 can board

Ivan-778·esp32_can_board

This repository ships a schematic but no board layout.

About the Esp32 can board

Esp32 can board is an open source ESP32 PCB design by Ivan-778, published on GitHub. It is a board, with 1 components from 1 distinct parts.

Its main chip is the ESP32-WROOM-32U, from the ESP32 family.

Esp32 can board bill of materials (BOM)

1 components, 1 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-WROOM-32U
Espressif
ESP32

Esp32 can board design files

The KiCad project lives in the Ivan-778/esp32_can_board repository on GitHub; these links point at the commit this page was built from.

Esp32 can board: common questions

What microcontroller does the Esp32 can board use?

The Esp32 can board is built around the ESP32-WROOM-32U, from the ESP32 family.

How many components are on the Esp32 can board?

1 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Esp32 can board design files?

From the Ivan-778/esp32_can_board repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.

Can I use the Esp32 can board design in my own project?

The repository has no license, so all rights stay with Ivan-778. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Esp32 can board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards