Rustyjack

Iwan-Teague·Rustyjack·pcb/actual pcb design/rustyjack-h616/rustyjack-h616.kicad_pcb

Rustyjack PCB layout, top view — open source board by Iwan-Teague

About the Rustyjack PCB

Rustyjack is an open source PCB design by Iwan-Teague, published on GitHub under the Custom license license. It is a 4-layer board measuring 26.5 × 72.5 mm, with 125 components from 35 distinct parts.

Other key parts include the H616, K4B8G1646D, AXP305 and CP2102N-Axx-xQFN28. By type, the board carries 69 capacitors, 26 resistors, 13 test points, 5 inductors, 4 ICs and 4 diodes.

It belongs with the iot & wireless and displays & leds designs in this gallery.

From the project

- Project Overview - Architecture - Hardware & Wiring - Controls - Display Backends & Dynamic Resolution - Display Calibration - UI Features - Installation - Configuration & Paths - Usage Tips - Troubleshooting - Legal

- Project Overview - Architecture - Hardware & Wiring - Controls - Display Backends & Dynamic Resolution - Display Calibration - UI Features - Installation - Configuration & Paths - Usage Tips - Troubleshooting - Legal

- Linux-only UI (compile guard in crates/rustyjack-ui/src/main.rs); designed for a Pi Zero 2 W with an Ethernet HAT. - Runs as rustyjack-ui.service (unprivileged) with RUSTYJACKDISPLAYROTATION=landscape by default. - Status overlay shows CPU temp/load, memory, disk, uptime, target SSID/BSSID/channel, active interface, current/original MAC, and autopilot status if the CLI…

Main components on the Rustyjack

Rustyjack bill of materials (BOM)

125 components, 35 distinct parts.

QtyPartRefs
1
H616
U1
1
K4B8G1646D
U2
1
AXP305
U3
1
CP2102N-Axx-xQFN28
U4
1
24MHz
Y1
1
Micro_SD_Card_Det2
J1
2
USB_C_Receptacle_USB2.0
J2, J3
13
TestPoint
TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 +5
2
LED
D1, D2
1
SP0502BAHT
D3
1
D_Schottky
D4
5
1,5uH
L1, L2, L3, L4, L5
5
100n
C1, C2, C58, C61, C62
13
1u
C3, C4, C5, C6, C8, C9, C10, C11 +5
1
2.2p
C7
24
10u
C15, C16, C17, C18, C19, C20, C23, C24 +16
3
4.7u
C21, C65, C68
14
2.2u
C40, C41, C42, C43, C44, C45, C46, C47 +6
2
470n
C54, C55
2
18p
C59, C60
Show 15 more
QtyPartRefs
1
220n
C63
1
1n
C64
3
47u
C66, C67, C69
6
2k
R1, R2, R15, R16, R17, R18
3
240R
R3, R5, R6
1
100R
R4
2
0R
R7, R9
1
NC
R8
1
1R
R10
1
33R
R11
5
10k
R12, R13, R20, R25, R26
1
1k
R14
1
150k
R19
2
5.1k
R21, R22
2
22k
R23, R24

Rustyjack design files

The KiCad project lives in the Iwan-Teague/Rustyjack repository on GitHub; these links point at the commit this page was built from.

Rustyjack: common questions

How big is the Rustyjack PCB?

The Rustyjack measures 26.5 × 72.5 mm, has 4 copper layers and is 0.552 mm thick.

How many components are on the Rustyjack?

125 components, from 35 distinct parts. The full bill of materials is listed on this page.

Where can I download the Rustyjack design files?

From the Iwan-Teague/Rustyjack repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Rustyjack design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Similar boards