118 open source boards using the CP2102N-Axx-xQFN28

Real designs built with the CP2102N-Axx-xQFN28, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

118 boardsClear filters|Most starred

How designs wire the CP2102N-Axx-xQFN28

Read from the KiCad layouts of 96 open source designs, one per repository: what each pin of the CP2102N-Axx-xQFN28 connects to, and the resistors, capacitors and other passives placed on it.

  • The CHR0 pin is left unconnected on 95 of 96 designs.
  • The CHR1 pin is left unconnected on 94 of 96 designs (a signal on 2).
  • The WAKEUP/GPIO.3 pin is left unconnected on 94 of 96 designs (a signal on 2).
  • The RS485/GPIO.2 pin is left unconnected on 94 of 96 designs (a signal on 2).
DCDpin 1Connected to: Not connected 95%
RI/CLKpin 2Connected to: Not connected 95%
GNDpin 3, 29Connected to: GND 94%
VDDpin 6Connected to: 3.3V 65% · a signal 33%
  • Decoupling capacitor on 73% · 100 nF (54), 10 µF (29), 4.7 µF (15)
VREGINpin 7Connected to: 3.3V 88%
  • Decoupling capacitor on 69% · 100 nF (56), 10 µF (28), 4.7 µF (18)
VBUSpin 8Connected to: Signal 56% · VBUS 44%
  • Resistor to GND on 51% · 47.5 kΩ (31), 47 kΩ (9), 47.5 Ω (1)
  • Pull-up to VBUS on 47% · 22.1 kΩ (30), 22 kΩ (8), 24 kΩ (4)
  • Capacitor to GND on 42% · 100 nF (26), 1 µF (19), 10 µF (5)
RSTpin 9Connected to: Signal 89%
  • Pull-up to 3.3V on 79% · 1 kΩ (33), 10 kΩ (21), 2 kΩ (11)
NCpin 10Connected to: Not connected 100%
SUSPENDpin 11, 12Connected to: Not connected 80% · a signal 19%
  • Resistor to GND on 33% · 10 kΩ (26), 0 Ω (2), 1 kΩ (1)
CHRENpin 13Connected to: Not connected 97%
CHR1pin 14Connected to: Not connected 98%
CHR0pin 15Connected to: Not connected 99%
WAKEUP/GPIO.3pin 16Connected to: Not connected 98%
RS485/GPIO.2pin 17Connected to: Not connected 98%
RXT/GPIO.1pin 18Connected to: Not connected 92%
TXT/GPIO.0pin 19Connected to: Not connected 92%
GPIO.6pin 20Connected to: Not connected 98%
GPIO.5pin 21Connected to: Not connected 97%
GPIO.4pin 22Connected to: Not connected 98%
CTSpin 23Connected to: Not connected 92%
RTSpin 24Connected to: Signal 61% · not connected 39%
  • Series resistor on 54% · 10 kΩ (47), 4.7 kΩ (2), 13.3 kΩ (1)
RXDpin 25Connected to: The microcontroller 43%
  • Series resistor on 42% · 1 kΩ (19), 0 Ω (13), 470 Ω (3)
TXDpin 26Connected to: The microcontroller 41%
  • Series resistor on 42% · 1 kΩ (18), 0 Ω (13), 470 Ω (4)
DSRpin 27Connected to: Not connected 95%
DTRpin 28Connected to: Signal 75% · not connected 25%
  • Series resistor on 52% · 10 kΩ (45), 13.3 kΩ (1), 22 Ω (1)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Upsy desky by tjhorner, Easyduino Atmega Nano by Hanqaqa, Uncut Gem by QuantumVillage and Dc serial by cepawiel.

The CP2102N-Axx-xQFN28 in open source designs

The gallery holds 118 open source boards using the CP2102N-Axx-xQFN28 from 98 GitHub repositories; a typical one measures about 60.3 × 58.3 mm and carries around 61 components.

57% are two-layer designs, the rest use four layers or more, and 31% carry an open source license.

The most starred is Upsy desky by tjhorner.

Microcontrollers on boards using the CP2102N-Axx-xQFN28

CP2102N-Axx-xQFN28: common questions

Where can I find a CP2102N-Axx-xQFN28 reference design?

Each of the 118 boards on this page is a real design using the CP2102N-Axx-xQFN28. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the CP2102N-Axx-xQFN28 CHR0 pin connected?

The CHR0 pin is left unconnected on 95 of 96 designs. Counted from the KiCad layouts of 96 open source designs using the CP2102N-Axx-xQFN28.

How is the CP2102N-Axx-xQFN28 CHR1 pin connected?

The CHR1 pin is left unconnected on 94 of 96 designs (a signal on 2). Counted from the KiCad layouts of 96 open source designs using the CP2102N-Axx-xQFN28.

How is the CP2102N-Axx-xQFN28 WAKEUP/GPIO.3 pin connected?

The WAKEUP/GPIO.3 pin is left unconnected on 94 of 96 designs (a signal on 2). Counted from the KiCad layouts of 96 open source designs using the CP2102N-Axx-xQFN28.

What parts are used alongside the CP2102N-Axx-xQFN28?

The AMS1117-3.3, ESP32-WROOM-32, ESP32-S3-WROOM-1, USBLC6-2SC6 and W25Q128JVS appear in the most repositories here.

Which microcontrollers do boards using the CP2102N-Axx-xQFN28 use?

Most are built on ESP32 (68), STM32 (14), RP2040/RP2350 (6) and PIC (1).

How big is a typical board using the CP2102N-Axx-xQFN28?

The median is 60.3 × 58.3 mm, and 57% are two-layer designs.

What is the most popular open source board using the CP2102N-Axx-xQFN28?

By GitHub stars, Upsy desky by tjhorner, with 833 stars.

Can I simulate one of these boards using the CP2102N-Axx-xQFN28 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part