Snak 28 tp horizontal
About the Snak 28 tp horizontal PCB
Snak 28 tp horizontal is an open source PCB design by JackMatanky, published on GitHub under the MIT license. It is a 2-layer board measuring 114.8 × 99.6 mm, with 42 components from 7 distinct parts.
By type, the board carries 28 diodes and 1 switch.
It belongs with the keyboards, iot & wireless and displays & leds designs in this gallery.
From the project
SNAK (Sisyphus Needed a Keyboard): A split, low-profile, wireless keyboard designed with Ergogen and built with a nice!nano MCU, nice!view OLED, and Kailh choc switches
- The first version would not have been possible without flatfootfox's Let's Design a Keyboard With Ergogen guide. - Later versions were heavily inspired by ceolide's corney-island - Almost all footprints are from infused-kim
Snak 28 tp horizontal bill of materials (BOM)
42 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 9 | — | mounting_hole | H1, H2, H3, H4, H5, H6, H7, H8 +1 |
| 1 | — | JST_PH_S2B-PH-K | JST1 |
| 1 | — | pads | PAD1 |
| 1 | power_switch | power_switch_smd_side | PWR1 |
| 1 | — | smd_805 | SMD1 |
| 1 | — | sw_reset_side | SW1 |
| 28 | — | diode_tht_sod123 | D1, D2, D3, D4, D5, D6, D7, D8 +20 |
Snak 28 tp horizontal design files
The KiCad project lives in the JackMatanky/kb_snak repository on GitHub; these links point at the commit this page was built from.
Snak 28 tp horizontal: common questions
How big is the Snak 28 tp horizontal PCB?
The Snak 28 tp horizontal measures 114.8 × 99.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Snak 28 tp horizontal?
42 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Snak 28 tp horizontal design files?
From the JackMatanky/kb_snak repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Snak 28 tp horizontal design in my own project?
Yes, under the terms of its MIT license, which JackMatanky chose for the repository.
More boards in kb_snak
Snak 30
114 × 99.6 mm43 parts2LMIT1
Snak 30 edge cuts
118.1 × 105 mm43 parts2LMIT1
Nordic nRFSnak 30 flatfoot
114 × 99.6 mm42 parts2LMIT1
Snak 30 virginia
114 × 99.6 mm41 parts2LMIT1
Snak 28 routing test
114.8 × 99.6 mm40 parts2LMIT1
Snak 28 edge cuts
114 × 102.1 mm40 parts2LMIT1
Snak 30 bottom border
114 × 98.5 mm13 parts2LMIT1
Nordic nRFTypePak
51.7 × 32 mm10 parts2LMIT1
Snak test
114 × 99.4 mm8 parts2LMIT1
Snak final
114 × 98.8 mm8 parts2LMIT1
Snak 30 test
114 × 99 mm7 parts2LMIT1
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2k
LevelShifterBreakout
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k