GD
Jacube1234·GD-Hackpad·PCB/GD-Hackpad working LED/GD.kicad_pcb
About the GD PCB
GD is an open source PCB design by Jacube1234, published on GitHub. It is a 2-layer board measuring 67 × 47 mm, with 8 components from 4 distinct parts.
Other key parts include the MOUDLE-SEEEDUINO-XIAO. By type, the board carries 5 switches, 2 diodes and 1 IC.
It belongs with the displays & leds designs in this gallery.
From the project
Hackpad for GD Platformers
Note on images and files: The photos and physical build shown below do not have the RGB LEDs or don't have them working due to a footprint error on my design. However, the updated KiCad and Gerber files in this repository include the corrected LED routing, so if you fabricate a board using the current files, the LEDs will work fully as designed!
This is my Hackpad designed for the purpose to play Geometry Dash Platformer levels. Basically a DIY Sayo Device but cool yk. I chose this project as I am comfortable with Fusion 360, and a chance to learn a new program - Kicad.

Main components on the GD
GD bill of materials (BOM)
8 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MOUDLE-SEEEDUINO-XIAO | XIAO-Generic-Hybrid-14P-2.54-21X17.8MM | U1 |
| 4 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW5 |
| 2 | NeoPixel_THT | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | D1, D2 |
GD design files
The KiCad project lives in the Jacube1234/GD-Hackpad repository on GitHub; these links point at the commit this page was built from.
GD: common questions
How big is the GD PCB?
The GD measures 67 × 47 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the GD?
8 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the GD design files?
From the Jacube1234/GD-Hackpad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the GD design in my own project?
The repository has no license, so all rights stay with Jacube1234. Use it as a reference, and ask the author before reusing the design.
More boards in GD-Hackpad
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k