QuadSerial
JakBroe·QuadSerial·KiCAD/USB_UART_Dongle.kicad_pcb
About the QuadSerial PCB
QuadSerial is an open source PCB design by JakBroe, published on GitHub under the MIT license. It is a 2-layer board measuring 43 × 42.5 mm, with 49 components from 18 distinct parts.
Other key parts include the FT4232H, 93LCxxB and TLV1117-33. By type, the board carries 21 capacitors, 14 resistors, 5 connectors, 3 ICs, 2 test points and 2 inductors.
From the project
USB Quad Serial Adapter

Main components on the QuadSerial
QuadSerial bill of materials (BOM)
49 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FT4232H | LQFP-64_10x10mm_Pitch0.5mm | IC1 |
| 1 | 93LCxxB | SOIC-8_3.9x4.9mm_Pitch1.27mm | U1 |
| 1 | TLV1117-33 | SOT-223 | U2 |
| 1 | 12MHz | Crystal_SMD_5032-2pin_5.0x3.2mm | Y1 |
| 1 | USB_B_Micro | USB_Micro-B_Wuerth-629105150521 | J1 |
| 4 | Conn_01x04 | JST_PH_S4B-PH-SM4-TB_04x2.00mm_Angled | J2, J3, J4, J5 |
| 1 | Polyfuse | Fuse_SMD1206_Reflow | F1 |
| 2 | TestPoint | Testoint | TP1, TP2 |
| 2 | L | L_0805 | L1, L2 |
| 2 | 1u | C_0603 | C1, C5 |
| 10 | 100n | C_0603 | C2, C3, C4, C11, C12, C13, C15, C17 +2 |
| 2 | 27p | C_0603 | C6, C7 |
| 1 | 3u3 | C_0603 | C8 |
| 6 | 4u7 | C_0603 | C9, C10, C20, C21, C22, C23 |
| 3 | 10k | R_0603 | R1, R2, R3 |
| 9 | 1k | R_0603 | R4, R7, R8, R9, R10, R11, R12, R13 +1 |
| 1 | 2k | R_0603 | R5 |
| 1 | 12k | R_0603 | R6 |
QuadSerial design files
The KiCad project lives in the JakBroe/QuadSerial repository on GitHub; these links point at the commit this page was built from.
QuadSerial: common questions
How big is the QuadSerial PCB?
The QuadSerial measures 43 × 42.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the QuadSerial?
49 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the QuadSerial design files?
From the JakBroe/QuadSerial repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the QuadSerial design in my own project?
Yes, under the terms of its MIT license, which JakBroe chose for the repository.