10 open source boards using the 93LCxxB
Real designs built with the 93LCxxB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Steppenprobe
diegoherranz
50 × 60 mm75 parts2LCERN-OHL-1.244JTAG-SWD-adapter
Neofoxx
91.3 × 48.3 mm98 parts2LNo license36FPGA
HUB75E ICE40
riktw
50 × 37.3 mm51 parts2LGPL-3.033RP2040/RP2350
Wacca Protocol Translator
FizzyApple12
161.5 × 106 mm108 parts2LNo license32Rev3
Fifty-Nine
55.9 × 76.2 mm98 parts4LCERN-OHL-1.24STM32
Base Board Design
WilliamSanchez
199.8 × 150 mm492 parts4LNo license2FPGA
CERBERUS
Darkops-cpu
87.3 × 40.5 mm85 parts4LNo license0QuadSerial
JakBroe
43 × 42.5 mm49 parts2LMIT0Usb gps
oresat
99.1 × 53.3 mm86 parts4LCERN-OHL-S-2.034Carrier
WesleyVong
100 × 90 mm51 parts4LNo license0
How designs wire the 93LCxxB
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the 93LCxxB connects to, and the resistors, capacitors and other passives placed on it.
- The DI pin has a series resistor on 10 of 10 designs, most often 2.2 kΩ (then 2 kΩ).
- The DO pin has a series resistor on 10 of 10 designs, most often 2.2 kΩ (then 2 kΩ).
- The VCC pin has a decoupling capacitor on 6 of 10 designs, most often 100 nF (then 1 µF).
- The DO pin has a pull-up to 3.3V on 5 of 10 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CSpin 1 | Connected to: FT2232HL-REEL 20%, FT232H 20%, FT4232H 20% |
|
| SCLKpin 2 | Connected to: FT2232HL-REEL 20%, FT232H 20%, FT4232H 20% |
|
| DIpin 3 | Connected to: FT2232HL-REEL 20%, FT232H 20%, FT4232H 20% |
|
| DOpin 4 | Connected to: Signal 100% |
|
| GNDpin 5 | Connected to: GND 90% | — |
| NCpin 6, 7 | Connected to: Not connected 100% | — |
| VCCpin 8 | Connected to: 3.3V 90% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Steppenprobe by diegoherranz, JTAG-SWD-adapter by Neofoxx, Usb gps by oresat and HUB75E ICE40 by riktw.
The 93LCxxB in open source designs
The gallery holds 10 open source boards using the 93LCxxB from 10 GitHub repositories; a typical one measures about 89.3 × 56.7 mm and carries around 86 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Steppenprobe by diegoherranz.
Parts used alongside the 93LCxxB
Microcontrollers on boards using the 93LCxxB
What boards using the 93LCxxB are built for
93LCxxB: common questions
Where can I find a 93LCxxB reference design?
Each of the 10 boards on this page is a real design using the 93LCxxB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the 93LCxxB DI pin?
The DI pin has a series resistor on 10 of 10 designs, most often 2.2 kΩ (then 2 kΩ). Counted from the KiCad layouts of 10 open source designs using the 93LCxxB.
What resistor goes on the 93LCxxB DO pin?
The DO pin has a series resistor on 10 of 10 designs, most often 2.2 kΩ (then 2 kΩ). Counted from the KiCad layouts of 10 open source designs using the 93LCxxB.
What decoupling capacitors do designs use on the 93LCxxB VCC pin?
The VCC pin has a decoupling capacitor on 6 of 10 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 10 open source designs using the 93LCxxB.
What parts are used alongside the 93LCxxB?
The FT2232HL-REEL, FT232H, FT4232H and ICE40UP5K-SG48ITR appear in the most repositories here.
Which microcontrollers do boards using the 93LCxxB use?
Most are built on FPGA (2), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the 93LCxxB?
The median is 89.3 × 56.7 mm, and 50% are two-layer designs.
What is the most popular open source board using the 93LCxxB?
By GitHub stars, Steppenprobe by diegoherranz, with 44 stars.
Can I simulate one of these boards using the 93LCxxB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.