32 open source boards using the TLV1117-33
Real designs built with the TLV1117-33, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAM
RocketPCR
GaudiLabs
105 × 33 mm45 parts2LGPL-3.0200RP2040/RP2350
RPROM
niklasekstrom
18 × 51 mm41 parts4LNo license46ESP32
ZigBee SmartMeter Reader
Tropaion
43.3 × 37.6 mm36 parts2LGPL-3.032ESP32
QPocketPCR Main
GaudiLabs
82.5 × 140 mm96 parts2LGPL-3.021AVR/Arduino
Cococpld
mattstock
83.3 × 98.3 mm60 partsNo license7STM32
SmallDSP Maxi
Gemuesesaft
120 × 120 mm511 parts4LGPL-3.01PCBRev2
MilesMayhew
213.4 × 128.3 mm63 parts2LNo license1ESP32
Windpup
barzamin
50.3 × 46.2 mm38 parts2LNo license1ESP32
ESP-Smartwatch
Westsi
40 × 29.7 mm34 parts4LGPL-2.01STM32
DAC1 Main board
mpinese
150 × 130 mm232 parts4LNo license0RP2040/RP2350
FligthComputers
ManuelRao
50 × 72.5 mm131 parts4LNo license0ESP32
Meesho-Put-To-Light
mayoogh-flexli
400 × 40 mm98 parts2LNo license0ESP32
LucaudioESP32
lucococo
92.4 × 70 mm91 parts2LNo license0STM32
Angst
electrodonkey
50.8 × 50.8 mm86 parts2LNo license0ESP32
ECG Project
Vike-n
56.5 × 47.2 mm78 parts2LNo license0QuadSerial
JakBroe
43 × 42.5 mm49 parts2LMIT0STM32
ReflowOvenController
wrickert
64.4 × 196.7 mm48 parts2LNo license06502-sbc
davidday99
96.5 × 96.6 mm47 parts4LNo license0STM32
Echo
kashishkebab9
51.1 × 50 mm42 parts4LNo license0ESP32
CarStatTracker
ShreshtChopra1
71.1 × 71.1 mm41 parts4LMIT0HalflifeAmp
Hobbes-2
53.5 × 89.5 mm39 parts2LNo license0Adapter hybrid assistor
dorotheapfeiffer
68.6 × 76.7 mm36 parts6LBSD-2-Clause0AVR/Arduino
BUENO-Gas-Sensor
MOSH-Insa-Toulouse
70.1 × 79 mm34 parts2LNo license0AVR/Arduino
Pannel
timChase98
98.5 × 80 mm32 parts2LNo license0ESP32
UniBikes
strifel
100 × 100 mm29 parts2LNo license0Esp8266-artnet mini
robinolejnik
30.5 × 29.2 mm25 parts2LMIT0ESP32
QCamPCR
GaudiLabs
82.5 × 140 mm95 parts2LGPL-3.021RISC-V
CyberTastic
wrickert
88.1 × 44.6 mm60 parts2LNo license8Capstone
MilesMayhew
232.4 × 172.7 mm55 parts2LNo license1AVR/Arduino
WetProgrammer
timChase98
48 × 25 mm31 parts2LNo license0Asterix
luhbots
62 × 60 mm101 parts4LNo license2Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487
How designs wire the TLV1117-33
Read from the KiCad layouts of 28 open source designs, one per repository: what each pin of the TLV1117-33 connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a decoupling capacitor on 20 of 28 designs, most often 100 nF (then 1 µF).
- The VO pin has a decoupling capacitor on 16 of 28 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 71% | — |
| VOpin 2 | Connected to: 3.3V 93% |
|
| VIpin 3 | Connected to: 5V 57% · a signal 43% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OpenDropV4 by GaudiLabs, RocketPCR by GaudiLabs, RPROM by niklasekstrom and ZigBee SmartMeter Reader by Tropaion.
The TLV1117-33 in open source designs
The gallery holds 32 open source boards using the TLV1117-33 from 29 GitHub repositories; a typical one measures about 70.6 × 71.8 mm and carries around 49 components.
68% are two-layer designs, the rest use four layers or more, and 34% carry an open source license.
The most starred is OpenDropV4 by GaudiLabs.
Parts used alongside the TLV1117-33
Microcontrollers on boards using the TLV1117-33
What boards using the TLV1117-33 are built for
TLV1117-33: common questions
Where can I find a TLV1117-33 reference design?
Each of the 32 boards on this page is a real design using the TLV1117-33. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TLV1117-33 VI pin?
The VI pin has a decoupling capacitor on 20 of 28 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 28 open source designs using the TLV1117-33.
What decoupling capacitors do designs use on the TLV1117-33 VO pin?
The VO pin has a decoupling capacitor on 16 of 28 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 28 open source designs using the TLV1117-33.
What parts are used alongside the TLV1117-33?
The TLV1117-50, ESP32-S3-WROOM-1, ESP32-WROVER-E, LM7805_TO220 and SAMD21G18B-A changed from SAML21 appear in the most repositories here.
Which microcontrollers do boards using the TLV1117-33 use?
Most are built on ESP32 (10), STM32 (5), AVR/Arduino (4) and RP2040/RP2350 (2).
How big is a typical board using the TLV1117-33?
The median is 70.6 × 71.8 mm, and 68% are two-layer designs.
What is the most popular open source board using the TLV1117-33?
By GitHub stars, OpenDropV4 by GaudiLabs, with 487 stars.
Can I simulate one of these boards using the TLV1117-33 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.