HardLabs

Display

JamesB-Wood·UniQHW·display_breakout_board/display.kicad_pcb

Display PCB layout, top view — open source board by JamesB-Wood

About the Display PCB

Display is an open source PCB design by JamesB-Wood, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 26 × 34 mm, with 9 components from 8 distinct parts.

Other key parts include the MCP1664T-E/OT. By type, the board carries 3 connectors, 2 capacitors, 1 IC, 1 diode, 1 inductor and 1 resistor.

It belongs with the displays & leds and audio designs in this gallery.

From the project

UniQHW

The hardware repository for UQ Phone (UniQ) The Corresponding software component can be found https://github.com/Benksur/UniQOS

Supervised by: Professor Pauline Pounds Institution: University of Queensland

Any Questions about the PCB and Schematics please direct them to james.brian.wood@outlook.com

The V0.2.0 PCB's must be made with the following specifications from JLCPCB

Main components on the Display

MCP1664T-E/OT

Display bill of materials (BOM)

9 components, 8 distinct parts.

QtyPartRefs
1
MCP1664T-E/OT
U1
2
541324562
J1, J2
1
Conn_02x12_Odd_Even
J3
1
PMEG2010EA
D1
1
4.7uH
L1
1
10uF
C1
1
4.7uF
C2
1
3.83R
R1

Display design files

The KiCad project lives in the JamesB-Wood/UniQHW repository on GitHub; these links point at the commit this page was built from.

Display: common questions

How big is the Display PCB?

The Display measures 26 × 34 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Display?

9 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the Display design files?

From the JamesB-Wood/UniQHW repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Display design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which JamesB-Wood chose for the repository.

More boards in UniQHW

Similar boards