KiCad---simple-STM32-project
JanBaryczkowski·KiCad---simple-STM32-project·KiOne/KiOne.kicad_pcb
About the KiCad---simple-STM32-project PCB
KiCad---simple-STM32-project is an open source STM32 PCB design by JanBaryczkowski, published on GitHub. It is a 2-layer board measuring 42.8 × 34.8 mm, with 28 components from 16 distinct parts.
Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 13 capacitors, 5 resistors, 4 connectors, 2 ICs, 1 crystal and 1 switch.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Project based on course made by Philip Salomony Overview
Project based on course made by Philip Salomony Overview
A hands-on PCB design project using KiCad V6 to create a fully custom STM32-based development board, transitioning from Arduino-style prototyping to professional-grade hardware. The board integrates critical STM32 peripherals (USB, SWD, GPIOs) and follows industry best practices for schematic design, layout, and manufacturing. Key Features
Main components on the KiCad---simple-STM32-project
KiCad---simple-STM32-project bill of materials (BOM)
28 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | STM32F103C8T6 | LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 3 | Conn_01x04_Male | PinHeader_1x04_P2.54mm_Vertical | J1, J2, J3 |
| 1 | USB_B_Micro | USB_Micro-B_Wuerth_629105150521 | J4 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW1 |
| 1 | RED | LED_0603_1608Metric | D1 |
| 1 | 120R | L_0603_1608Metric | FB1 |
| 2 | 22u | C_0805_2012Metric | C1, C2 |
| 1 | 10u | C_0603_1608Metric | C3 |
| 5 | 100n | C_0402_1005Metric | C4, C6, C7, C9, C10 |
| 2 | 10p | C_0402_1005Metric | C5, C8 |
| 1 | 10n | C_0402_1005Metric | C11 |
| 2 | 1u | C_0402_1005Metric | C12, C13 |
| 4 | 1k5 | R_0402_1005Metric | R1, R2, R3, R5 |
| 1 | 10k | R_0402_1005Metric | R4 |
KiCad---simple-STM32-project design files
The KiCad project lives in the JanBaryczkowski/KiCad---simple-STM32-project repository on GitHub; these links point at the commit this page was built from.
- LayoutKiOne/KiOne.kicad_pcb
- SchematicKiOne/KiOne.kicad_sch
KiCad---simple-STM32-project: common questions
What microcontroller does the KiCad---simple-STM32-project use?
The KiCad---simple-STM32-project is built around the STM32F103C8T6, from the STM32 family.
How big is the KiCad---simple-STM32-project PCB?
The KiCad---simple-STM32-project measures 42.8 × 34.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the KiCad---simple-STM32-project?
28 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the KiCad---simple-STM32-project design files?
From the JanBaryczkowski/KiCad---simple-STM32-project repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the KiCad---simple-STM32-project design in my own project?
The repository has no license, so all rights stay with JanBaryczkowski. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the KiCad---simple-STM32-project without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k