Vetroplach board
About the Vetroplach board
Vetroplach board is an open source PCB design by jankrejci, published on GitHub. It is a 4-layer board measuring 88 × 80 mm, with 120 components from 31 distinct parts.
Other key parts include the DRV8300DPWR, GS8054, TMUX741x, MT3608 and REF3012. By type, the board carries 37 capacitors, 30 resistors, 28 transformers, 6 ICs, 6 transistors and 4 inductors.
From the project
An ultrasonic anemometer: KiCad PCB designs and ESP32-S3 firmware.
An ultrasonic anemometer: KiCad PCB designs and ESP32-S3 firmware.
- firmware/vetroplach/ — ESP32-S3 firmware (Rust, esp-hal + Embassy) - pcb/vetroplach-board/ — main controller board - pcb/sensor-board/ — environmental sensor board - pcb/components/ — shared KiCad symbol and footprint library - nix/ — flake modules: toolchain, checks, dev shells - docs/ — design notes and simulations
Main components on the Vetroplach board
Vetroplach board bill of materials (BOM)
120 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DRV8300DPWR | TSSOP-20-4.4x6.5 | IC1 |
| 1 | GS8054 | TSSOP-14-4.4x5.0 | IC2 |
| 1 | TMUX741x | WQFN-16-4.0x4.0 | IC3 |
| 1 | MT3608 | SOT-23-6-HandSolder | U2 |
| 1 | REF3012 | SOT-23 | U3 |
| 1 | LM393 | SOIC-8-3.9x4.9-P1.27 | U7 |
| 6 | 2N7002 | SOT-23 | Q101, Q102, Q201, Q202, Q301, Q302 |
| 3 | Conn_01x06 | PinHeader-1x06-P2.54mm-Vertical | J1, J2, J3 |
| 3 | Speaker_Ultrasound | CUSA-TR65-065-2200-TH68 | ST101, ST201, ST301 |
| 28 | TestPoint | TestPoint-Pad-1.0x1.0 | T1, T2, T3, T4, T9, T10, T11, T101 +20 |
| 1 | 1N5819WS | D-SOD-323-HandSolder | D1 |
| 2 | 1N4148WS | D-SOD-323-HandSolder | D3, D4 |
| 1 | 6u8 | L-Axial-L7.0-D3.3mm-P10.16 | L1 |
| 3 | 8.2mH | L-Axial-L12.0-D5.0-P15.24 | L101, L201, L301 |
| 8 | 22u | C-0805-HandSolder | C1, C2, C18, C21, C31, C104, C204, C304 |
| 1 | 330p | C-0603-HandSolder | C6 |
| 1 | 220p | C-0603-HandSolder | C7 |
| 21 | 100n | C-0603-HandSolder | C9, C11, C13, C17, C20, C28, C29, C30 +13 |
| 3 | 1u | C-0603-HandSolder | C102, C202, C302 |
| 3 | 1n | C-1206-HandSolder | C103, C203, C303 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 10k | R-0603-HandSolder | R3, R12, R14, R17, R20 |
| 3 | 100k | R-0603-HandSolder | R10, R11, R23 |
| 1 | 2k2 | R-0603-HandSolder | R13 |
| 1 | 4k7 | R-0603-HandSolder | R15 |
| 1 | 150k | R-0603-HandSolder | R16 |
| 1 | 330k | R-0603-HandSolder | R18 |
| 1 | 2k | R-0603-HandSolder | R19 |
| 2 | 1k | R-0603-HandSolder | R21, R22 |
| 3 | 3k | R-0603-HandSolder | R24, R25, R26 |
| 9 | 10R | R-0603-HandSolder | R101, R102, R103, R201, R202, R203, R301, R302 +1 |
| 3 | 0R | R-0805-HandSolder | R105, R205, R305 |
Vetroplach board design files
The KiCad project lives in the jankrejci/vetroplach repository on GitHub; these links point at the commit this page was built from.
Vetroplach board: common questions
How big is the Vetroplach board?
The Vetroplach board measures 88 × 80 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Vetroplach board?
120 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the Vetroplach board design files?
From the jankrejci/vetroplach repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Vetroplach board design in my own project?
The repository has no license, so all rights stay with jankrejci. Use it as a reference, and ask the author before reusing the design.
