Uut mesh board cal
About the Uut mesh board cal
Uut mesh board cal is an open source PCB design by jaseg, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 36.5 × 36.5 mm, with 10 components from 5 distinct parts.
By type, the board carries 6 resistors and 4 connectors.
It belongs with the test & measurement designs in this gallery.
From the project
Research tamper-sensing mesh monitoring using Time-Domain Reflectometry published in TCHES 2026/1
High Fidelity Security Mesh Monitoring using Low-Cost, Embedded Time Domain Reflectometry =========================================================================================
This repository contains all sources for our paper "High Fidelity Security Mesh Monitoring using Low-Cost, Embedded Time Domain Reflectometry" to be published in CHES 2026/1 (preprint on eprint ). You can find a brief overview of the project on Jan's blog .
Uut mesh board cal bill of materials (BOM)
10 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C2897291 Conn_02x10_Counter_Clockwise | sfp_edge_connector_male | J1 |
| 1 | USB_C_RECEPTACLE_USB2.0 Conn_02x10_Counter_Clockwise | sfp_edge_connector_male | J2 |
| 2 | Conn_02x10_Counter_Clockwise | sfp_edge_connector_male | J3, J4 |
| 4 | 45 | R_0603_1608Metric | R1, R2, R3, R4 |
| 2 | 90 | R_0603_1608Metric | R5, R6 |
Uut mesh board cal design files
The KiCad project lives in the jaseg/sampling-mesh-monitor repository on GitHub; these links point at the commit this page was built from.
Uut mesh board cal: common questions
How big is the Uut mesh board cal?
The Uut mesh board cal measures 36.5 × 36.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Uut mesh board cal?
10 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Uut mesh board cal design files?
From the jaseg/sampling-mesh-monitor repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Uut mesh board cal design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which jaseg chose for the repository.
More boards in sampling-mesh-monitor
Similar boards
LevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0k
StackLink
52.3 × 10.5 mm5 parts2LGPL-3.05.0k
AnalyzerBoxPCB fork
52.7 × 47.9 mm54 parts4LGPL-3.05.0k
EleLab v2 Bus100
Chrismettal
100 × 100 mm37 parts2LGPL-3.0528
EleLab v2 Bus150
150 × 50 mm37 parts2LGPL-3.0528
EleLab v2 PowerFeed
68 × 50 mm11 parts2LGPL-3.0528