Uut meshes
About the Uut meshes PCB
Uut meshes is an open source PCB design by jaseg, published on GitHub under the CC-BY-SA-4.0 license. It is a 4-layer board measuring 100 × 100 mm, with 8 components from 7 distinct parts.
It belongs with the test & measurement designs in this gallery.
From the project
Research tamper-sensing mesh monitoring using Time-Domain Reflectometry published in TCHES 2026/1
High Fidelity Security Mesh Monitoring using Low-Cost, Embedded Time Domain Reflectometry =========================================================================================
This repository contains all sources for our paper "High Fidelity Security Mesh Monitoring using Low-Cost, Embedded Time Domain Reflectometry" to be published in CHES 2026/1 (preprint on eprint ). You can find a brief overview of the project on Jan's blog .
Uut meshes bill of materials (BOM)
8 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C2897291 Conn_02x10_Counter_Clockwise | sfp_edge_connector_male | J1 |
| 1 | USB_C_RECEPTACLE_USB2.0 Conn_02x10_Counter_Clockwise | sfp_edge_connector_male | J2 |
| 2 | Conn_02x10_Counter_Clockwise | sfp_edge_connector_male | J3, J4 |
| 1 | MeshAnchor_2W_T0.200mm_S0.200mm | MeshAnchor_2W_T0.200mm_S0.200mm | J5 |
| 1 | MeshAnchor_2W_T0.150mm_S0.150mm | MeshAnchor_2W_T0.150mm_S0.150mm | J6 |
| 1 | MeshAnchor_2W_T0.300mm_S0.300mm | MeshAnchor_2W_T0.300mm_S0.300mm | J7 |
| 1 | MeshAnchor_2W_T0.500mm_S0.500mm | MeshAnchor_2W_T0.500mm_S0.500mm | J8 |
Uut meshes design files
The KiCad project lives in the jaseg/sampling-mesh-monitor repository on GitHub; these links point at the commit this page was built from.
Uut meshes: common questions
How big is the Uut meshes PCB?
The Uut meshes measures 100 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Uut meshes?
8 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Uut meshes design files?
From the jaseg/sampling-mesh-monitor repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Uut meshes design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which jaseg chose for the repository.
More boards in sampling-mesh-monitor
Similar boards
LevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0k
StackLink
52.3 × 10.5 mm5 parts2LGPL-3.05.0k
AnalyzerBoxPCB fork
52.7 × 47.9 mm54 parts4LGPL-3.05.0k
EleLab v2 Bus100
Chrismettal
100 × 100 mm37 parts2LGPL-3.0528
EleLab v2 Bus150
150 × 50 mm37 parts2LGPL-3.0528
EleLab v2 PowerFeed
68 × 50 mm11 parts2LGPL-3.0528