Stm32g474
Jayanth-M0625·MRL·stm32g474/stm32g474.kicad_pcb
About the Stm32g474 PCB
Stm32g474 is an open source STM32 PCB design by Jayanth-M0625, published on GitHub. It is a 4-layer board measuring 56.8 × 57 mm, with 100 components from 24 distinct parts.
Its main chip is the STM32G474QETx, from the STM32 family. Other key parts include the MCP2517FD-xSL and TJA1051T-3. By type, the board carries 45 capacitors, 22 resistors, 10 ICs, 10 connectors, 5 crystals and 3 diodes.
From the project
Work at MRL
Main components on the Stm32g474
Stm32g474 bill of materials (BOM)
100 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32G474QETx | LQFP-128_14x14mm_P0.4mm | U1 |
| 3 | MCP2517FD-xSL | SOIC-14_3.9x8.7mm_P1.27mm | U2, U3, U6 |
| 6 | TJA1051T-3 | SOIC-8_3.9x4.9mm_P1.27mm | U4, U5, U7, U8, U9, U10 |
| 1 | CM7V-T1A-32.768kHz-7pF-10PPM-TA-QC T3 32.768KHz Micro Crystal | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | ECS-240-20-33-CKM-TR3 24MHz ECS | Crystal_SMD_TXC_7M-4Pin_3.2x2.5mm | Y2 |
| 3 | CX3225FB40000F0FZZH1 40MHz KYOCERA AVX | Crystal_SMD_TXC_7M-4Pin_3.2x2.5mm | Y3, Y4, Y5 |
| 8 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J2, J3, J6, J7, J8, J9, J10, J11 |
| 2 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Horizontal | J4, J5 |
| 2 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | 3.3V, 5V |
| 1 | SW_SPDT_321 | SW_SPDT_PCM12 | SW2 |
| 1 | SW_Push | SW_SPST_CK_RS282G05A3 | SW3 |
| 3 | LED | LED_0402_1005Metric | D1, D2, D3 |
| 1 | 120R | L_0603_1608Metric | FB1 |
| 25 | 0402ZC104MAT2A 100n KYOCERA AVX | C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C8 +17 |
| 1 | C0805C106K8PAC 10u KEMET | C_0805_2012Metric | C10 |
| 7 | 10n | C_0402_1005Metric | C11, C26, C32, C38, C40, C44, C47 |
| 2 | 1u | C_0402_1005Metric | C13, C15 |
| 2 | 7p | C_0402_1005Metric | C16, C17 |
| 6 | 10p | C_0402_1005Metric | C19, C25, C27, C28, C33, C34 |
| 2 | 20p | C_0402_1005Metric | C20, C21 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 390R | R_0402_1005Metric | R1 |
| 5 | 10K | R_0402_1005Metric | R2, R19, R20, R21, R22 |
| 4 | 1K | R_0402_1005Metric | R3, R4, R17, R18 |
| 12 | 60R | R_0402_1005Metric | R5, R6, R7, R8, R9, R10, R11, R12 +4 |
Stm32g474 design files
The KiCad project lives in the Jayanth-M0625/MRL repository on GitHub; these links point at the commit this page was built from.
- Layoutstm32g474/stm32g474.kicad_pcb
- Schematicstm32g474/stm32g474.kicad_sch
Stm32g474: common questions
What microcontroller does the Stm32g474 use?
The Stm32g474 is built around the STM32G474QETx, from the STM32 family.
How big is the Stm32g474 PCB?
The Stm32g474 measures 56.8 × 57 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Stm32g474?
100 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the Stm32g474 design files?
From the Jayanth-M0625/MRL repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Stm32g474 design in my own project?
The repository has no license, so all rights stay with Jayanth-M0625. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Stm32g474 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in MRL
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k