4 open source boards using the MCP2517FD-xSL
Real designs built with the MCP2517FD-xSL, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Golf-Robot-2024
ibuki-oono
68.6 × 53.3 mm75 parts2LNo license0Raspberry Pi
Rpi hat
ppetr
65 × 56.5 mm22 parts2LApache-2.02STM32
Stm32g474
Jayanth-M0625
56.8 × 57 mm100 parts4LNo license0Raspberry Pi
InterfaceRaspiCAN
ARIG-Robotique
65 × 56 mm32 parts4LNo license0
The MCP2517FD-xSL in open source designs
The gallery holds 4 open source boards using the MCP2517FD-xSL from 4 GitHub repositories; a typical one measures about 65 × 56.3 mm and carries around 54 components.
50% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is Rpi hat by ppetr.
Microcontrollers on boards using the MCP2517FD-xSL
What boards using the MCP2517FD-xSL are built for
MCP2517FD-xSL: common questions
Where can I find a MCP2517FD-xSL reference design?
Each of the 4 boards on this page is a real design using the MCP2517FD-xSL. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCP2517FD-xSL use?
Most are built on Raspberry Pi (2) and STM32 (1).
How big is a typical board using the MCP2517FD-xSL?
The median is 65 × 56.3 mm, and 50% are two-layer designs.
What is the most popular open source board using the MCP2517FD-xSL?
By GitHub stars, Rpi hat by ppetr, with 2 stars.
Can I simulate one of these boards using the MCP2517FD-xSL before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.