HardLabs

AVR-ZIF-Programmer

jbtronics·AVR-ZIF-Programmer·PCB/AVR-ZIF-Prog.kicad_pcb

AVR-ZIF-Programmer PCB layout, top view — open source AVR/Arduino board by jbtronics
Simulate this board

About the AVR-ZIF-Programmer PCB

AVR-ZIF-Programmer is an open source AVR/Arduino PCB design by jbtronics, published on GitHub. It is a 2-layer board measuring 96.5 × 76.2 mm, with 34 components from 21 distinct parts.

Its main chip is the ATMEGA8-P, from the AVR/Arduino family. By type, the board carries 10 connectors, 10 resistors, 7 capacitors, 4 diodes, 1 IC and 1 crystal.

It belongs with the usb & debug tools designs in this gallery.

From the project

An AVR Programmer based on USBasp which uses a ZIF-Socket for Programming.

Main components on the AVR-ZIF-Programmer

ATMEGA8-P

AVR-ZIF-Programmer bill of materials (BOM)

34 components, 21 distinct parts.

QtyPartRefs
1
ATMEGA8-P
IC1
1
12MHz
Y1
1
USB_B
P1
1
SLOW_SCK
P2
1
ZIF40
P3
1
AVR-ISP
P4
1
RESET
P5
1
XTAL
P6
4
MOUNT
P7, P8, P9, P10
1
Poly 500mA
F1
2
3V6
D1, D2
1
green
D3
1
red
D4
4
15p
C1, C2, C6, C7
1
10u
C3
2
100n
C4, C5
1
2k2
R1
1
10k
R2
2
68
R3, R4
4
220
R5, R6, R7, R8
Show 1 more
QtyPartRefs
2
1k
R9, R10

AVR-ZIF-Programmer design files

The KiCad project lives in the jbtronics/AVR-ZIF-Programmer repository on GitHub; these links point at the commit this page was built from.

AVR-ZIF-Programmer: common questions

What microcontroller does the AVR-ZIF-Programmer use?

The AVR-ZIF-Programmer is built around the ATMEGA8-P, from the AVR/Arduino family.

How big is the AVR-ZIF-Programmer PCB?

The AVR-ZIF-Programmer measures 96.5 × 76.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the AVR-ZIF-Programmer?

34 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the AVR-ZIF-Programmer design files?

From the jbtronics/AVR-ZIF-Programmer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the AVR-ZIF-Programmer design in my own project?

The repository has no license, so all rights stay with jbtronics. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the AVR-ZIF-Programmer without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards