Sdr glonass
jcelord·sdr-glonass·front-end/pcb/glonass_rx.net
About the Sdr glonass PCB
Sdr glonass is an open source PCB design by jcelord, published on GitHub. It is a board, with 113 components from 36 distinct parts.
By type, the board carries 67 capacitors, 21 resistors, 2 relays, 1 connector and 1 inductor.
It belongs with the rf & radio designs in this gallery.
Sdr glonass bill of materials (BOM)
113 components, 36 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBB-1J | J1 | |
| 1 | MAX2769 | DA10 | |
| 1 | LT1763CS8-3.3 | DA101 | |
| 1 | 24LC128-I/SN | DD1 | |
| 1 | CY7C68013A-56PVXC | DD2 | |
| 1 | XC9572XL-10VQG64I | DD3 | |
| 1 | GXO-U108L 25.0MHz | G101 | |
| 2 | CONTACTPAD | K101, K102 | |
| 3 | KP-1608SURC | VD2, VD4, VD6 | |
| 1 | 1N4148W | VD8 | |
| 1 | 16MHz_IN | XP2 | |
| 2 | 1575MHz_IN | XP4, XP5 | |
| 1 | BH2-14 | XP6 | |
| 1 | HC-49SM 24.0MHz | XT1 | |
| 5 | BLM18EG601SN1 | Z101, Z102, Z103, Z104, Z105 | |
| 1 | BFCN-1575 | Z106 | |
| 1 | 0.033u | L1 | |
| 7 | 10u | C1, C2, C31, C43, C68, C71, C102 | |
| 26 | 0.1u | C3, C5, C32, C37, C41, C45, C47, C52 +18 | |
| 12 | 100 | C4, C15, C34, C36, C39, C44, C46, C48 +4 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 0.01u | C10, C70, C73, C75, C77 | |
| 12 | 2.2u | C19, C66, C69, C107, C108, C109, C110, C111 +4 | |
| 1 | 27 | C54 | |
| 1 | 470 | C55 | |
| 2 | 12 | C59, C60 | |
| 1 | 1u | C64 | |
| 8 | 10k | R13, R15, R16, R18, R19, R20, R21, R54 | |
| 2 | 100k | R14, R53 | |
| 1 | 20k | R17 | |
| 2 | 2.2k | R34, R35 | |
| 1 | 1M | R36 | |
| 3 | 100 | R55, R56, R57 | |
| 1 | 1k | R58 | |
| 1 | 4.7k | R59 | |
| 1 | PLD-2 | R60 | |
| 1 | 0 | R64 |
Sdr glonass design files
The KiCad project lives in the jcelord/sdr-glonass repository on GitHub; these links point at the commit this page was built from.
- Netlistfront-end/pcb/glonass_rx.net
Sdr glonass: common questions
How many components are on the Sdr glonass?
113 components, from 36 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sdr glonass design files?
From the jcelord/sdr-glonass repository on GitHub, which has a netlist; the links under Design files point to each one.
Can I use the Sdr glonass design in my own project?
The repository has no license, so all rights stay with jcelord. Use it as a reference, and ask the author before reusing the design.
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568