AfdDriver2Layer
jduanen·alienFontDisplay·board/afdDriverOP2/afdDriver2Layer.kicad_pcb
About the AfdDriver2Layer PCB
AfdDriver2Layer is an open source PCB design by jduanen, published on GitHub under the MIT license. It is a board measuring 43.2 × 58.4 mm, with 50 components from 9 distinct parts.
Other key parts include the PCF8574TS and QTM3063T1. By type, the board carries 27 resistors, 9 ICs, 8 diodes, 4 connectors and 1 capacitor.
It belongs with the displays & leds, iot & wireless and power & battery designs in this gallery.
From the project
Display made of six eight-segment EL display units
Scrolling display board that displays whatever string is published on a given MQTT channel over WiFi.
These displays were used in Russian tanks and missile launch consoles.
Specs - 220VAC @ 400Hz - 0.5-3mA per display four displays: 12mA (max) six displays: 18mA (max) Design alternatives - drive audio amp into (CT?) step-up transformer - DC boost converter into H-Bridge

Main components on the AfdDriver2Layer
AfdDriver2Layer bill of materials (BOM)
50 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PCF8574TS | SSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 8 | QTM3063T1 | 4-SMD_3.8x4.6mm | U2, U3, U4, U5, U6, U7, U8, U9 |
| 2 | Qwiic_Connector | JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J1, J2 |
| 2 | HighVoltageAC | PinHeader_1x02_P1.00mm_Vertical | J3, J4 |
| 1 | IEL-O-VI_C63.396.208-02_SMD | C63.396.208-02_SMD | DS1 |
| 8 | Z0103MN | SOT-223 | D1, D2, D3, D4, D5, D6, D7, D8 |
| 1 | 0.1 uFd | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 3 | 10K Ohm | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3 |
| 24 | 390 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5, R6, R7, R8, R9, R10, R11 +16 |
AfdDriver2Layer design files
The KiCad project lives in the jduanen/alienFontDisplay repository on GitHub; these links point at the commit this page was built from.
AfdDriver2Layer: common questions
How big is the AfdDriver2Layer PCB?
The AfdDriver2Layer measures 43.2 × 58.4 mm and is 1.6002 mm thick.
How many components are on the AfdDriver2Layer?
50 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the AfdDriver2Layer design files?
From the jduanen/alienFontDisplay repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the AfdDriver2Layer design in my own project?
Yes, under the terms of its MIT license, which jduanen chose for the repository.
More boards in alienFontDisplay
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k