Wordclock board
jedp·wordclock-board·layout/wordclock-board.kicad_pcb
About the Wordclock board
Wordclock board is an open source STM32 PCB design by jedp, published on GitHub. It is a 4-layer board measuring 105.4 × 105.4 mm, with 96 components from 24 distinct parts.
Its main chip is the STM32F042C4Tx, from the STM32 family. Other key parts include the MCP1802x-xx02xOT, MAX7219 and USBLC6-2SC6. By type, the board carries 65 diodes, 17 capacitors, 4 ICs, 3 resistors, 2 connectors and 2 switches.
From the project
Programmed via ST-Link (CLK, GND, DIO, NRST). Easy peasy!
Programmed via ST-Link (CLK, GND, DIO, NRST). Easy peasy!
External low-speed crystal oscillator (32.768kHz) enables real-time clock module to function on VBAT when VDD is disconnected.
Imagine the 64 LEDs are 8 7-segment LEDs.
Pin 1 DATA: Data loaded on CLK's rising edge.
Pin 12 NCS: Data is loaded into the shift register when this is low.
Pins 2, 3, 5, 6, 7, 8, 10, and 11 (the DIG pins) are pulled high when switched off.
Main components on the Wordclock board
Wordclock board bill of materials (BOM)
96 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F042C4Tx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | MCP1802x-xx02xOT | SOT-23-5 | U2 |
| 1 | MAX7219 | SOIC-24W_7.5x15.4mm_P1.27mm | U3 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U4 |
| 1 | Crystal_Small | Crystal_SMD_MicroCrystal_CC5V-T1A-2Pin_4.1x1.5mm_HandSoldering | Y1 |
| 1 | USB_B_Micro | USB_Micro-B_Molex-105133-0001 | J1 |
| 1 | ST-Link | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Battery_Cell | BatteryHolder_Seiko_MS621F | BT1 |
| 1 | SW_Hour | SW_Tactile_SPST_Angled_PTS645Vx83-2LFS | SW1 |
| 1 | SW_Min | SW_Tactile_SPST_Angled_PTS645Vx83-2LFS | SW2 |
| 64 | LED_Small | LED_0603_1608Metric | D1, D2, D3, D4, D5, D6, D7, D8 +56 |
| 1 | 1N5819 | D_0805_2012Metric | D65 |
| 1 | Ferrite_Bead_Small | L_0805_2012Metric | FB1 |
| 1 | 0.01u | C_0603_1608Metric | C1 |
| 7 | 0.1u | C_0603_1608Metric | C2, C7, C9, C10, C11, C12, C13 |
| 1 | 47u | C_0805_2012Metric | C3 |
| 1 | 1u | C_0603_1608Metric | C4 |
| 1 | 10u | C_0805_2012Metric | C5 |
| 1 | 4.7u | C_0805_2012Metric | C6 |
| 1 | 10u | CP_Elec_5x4.5 | C8 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 0.1u | C_0805_2012Metric | C14, C15 |
| 2 | 4.7p | C_0603_1608Metric | C16, C17 |
| 1 | 10k | R_0603_1608Metric | R1 |
| 2 | 22 | R_0603_1608Metric | R2, R3 |
Wordclock board design files
The KiCad project lives in the jedp/wordclock-board repository on GitHub; these links point at the commit this page was built from.
Wordclock board: common questions
What microcontroller does the Wordclock board use?
The Wordclock board is built around the STM32F042C4Tx, from the STM32 family.
How big is the Wordclock board?
The Wordclock board measures 105.4 × 105.4 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Wordclock board?
96 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the Wordclock board design files?
From the jedp/wordclock-board repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Wordclock board design in my own project?
The repository has no license, so all rights stay with jedp. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Wordclock board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k