61 open source boards using the MAX7219
Real designs built with the MAX7219, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
OpenDeck r3.1.2
shanteacontrols
181 × 97 mm258 parts2LApache-2.0956AVR/Arduino
Hl alyx glove
StarGate01
85.6 × 41 mm33 parts2LMIT20AVR/Arduino
Matrixclock gnm-19881-bsg
WiseLord
191.8 × 48.4 mm35 parts2LNo license16FPGA
CPArti-FPGA-Development-Board
AAWO
100 × 100 mm393 parts4LNo license13RP2040/RP2350
Painel pcb1
ArqueologiaDigital
91.4 × 119.4 mm59 parts2LNo license4AVR/Arduino
Kitchen timer
timer-chefs
60 × 110.8 mm48 parts2LNo license3AVR/Arduino
UZ80
adzierzanowski
231.4 × 159.9 mm112 parts2LNo license28x8-LED-matrix-Purple-MAX7219-board hardware design
SolderedElectronics
22 × 54 mm70 parts2LTAPR-OHL-1.02STM32
Wordclock
evanparizot
350 × 349.9 mm315 parts4LNo license1RP2040/RP2350
Generic radio stack
neilenns
225 × 108.1 mm107 parts2LMIT1RP2040/RP2350
Mass Spring Damper SysID Lab
Scalable-Open-Source-Labs
185 × 83 mm82 parts2LMIT18x8-LED-Matrix-Green-MAX7219-board hardware design
SolderedElectronics
22 × 54 mm70 parts2LTAPR-OHL-1.018x8-LED-matrix-White-MAX7219-board hardware design
SolderedElectronics
22 × 54 mm70 parts2LTAPR-OHL-1.018x8-LED-matrix-Blue-MAX7219-board hardware design
SolderedElectronics
22 × 54 mm70 parts2LTAPR-OHL-1.01AVR/Arduino
Switch Panel
Plasmarobo
118.1 × 80 mm55 parts2LCC-BY-NC-4.01RP2040/RP2350
Kgc
szczurkosmiczny
200 × 100 mm36 parts2LGPL-3.01STM32
Mini snake
vinn-ie
68 × 40 mm183 parts4LMIT0AVR/Arduino
Ccboard
troisiemetype
135 × 124 mm177 parts2LNo license0Keyswitch
JeremyJStarcher
357.2 × 140.5 mm160 parts2LNo license0STM32
Wordclock board
jedp
105.4 × 105.4 mm96 parts4LNo license0ESP8266
PCV MATOME MAIN V5-KICAD 5.0
leevawns
170 × 95 mm86 parts2LNo license08x8-LED-matrix-Orange-MAX7219-board hardware design
SolderedElectronics
22 × 54 mm70 parts2LTAPR-OHL-1.008x8-LED-matrix-Red-MAX7219-board hardware design
SolderedElectronics
22 × 54 mm70 parts2LTAPR-OHL-1.00Soldered-8x8-LED-Matrix-Blue-MAX7219-board hardware design
test-gh-syncer2
22 × 54 mm70 parts2LTAPR-OHL-1.00AVR/Arduino
TachMetr-V2.0
Wladymyr1996
80 × 80 mm63 parts2LNo license0ESP8266
Climatedisplay
Qeteshpony
100 × 100 mm59 parts2LBSD-2-Clause0ESP32
Esp23 i3 heat thermostat
i3detroit
111 × 65 mm54 parts2LNo license0Makineat v 05
gustavostuff
100 × 100 mm51 parts2LCERN-OHL-S-2.00Maki nita v 03
gustavostuff
100 × 100 mm42 parts2LCERN-OHL-S-2.00Metromap
gergelytothh
42 × 50 mm42 parts2LMIT0PIC
TACOMETRO USB
lucas458
76 × 76 mm42 parts2LNo license0ESP32
Sparks
vinicius-cardoso
66 × 101 mm41 parts2LGPL-3.00AVR/Arduino
LED Nametag
LyricSantana
100 × 64 mm28 parts2LNo license0Raspberry Pi
Reveil
oscarlederrey
170 × 90 mm25 parts2LNo license0Kicad board-2026-07-27-bluematrixticker
SimulatedFlow
100 × 80 mm17 parts4LCustom license0RP2040/RP2350
Pathfound
OJOkhiria
145.5 × 62.4 mm16 parts2LApache-2.00
How designs wire the MAX7219
Read from the KiCad layouts of 45 open source designs, one per repository: what each pin of the MAX7219 connects to, and the resistors, capacitors and other passives placed on it.
- The ISET pin has a pull-up to 5V on 37 of 45 designs, most often 10 kΩ (then 22 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 4, 9 | Connected to: GND 96% | — |
| ISETpin 18 | Connected to: Signal 98% |
|
| V+pin 19 | Connected to: 5V 91% |
|
20 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ButtonsLEDs by shanteacontrols, Hl alyx glove by StarGate01, Routing Board by Bad-Dog-Designs and Matrixclock gnm-19881-bsg by WiseLord.
The MAX7219 in open source designs
The gallery holds 61 open source boards using the MAX7219 from 46 GitHub repositories; a typical one measures about 100 × 81.5 mm and carries around 52 components.
85% are two-layer designs, the rest use four layers or more, and 48% carry an open source license.
The most starred is OpenDeck r3.1.2 by shanteacontrols.
Parts used alongside the MAX7219
Microcontrollers on boards using the MAX7219
What boards using the MAX7219 are built for
MAX7219: common questions
Where can I find a MAX7219 reference design?
Each of the 61 boards on this page is a real design using the MAX7219. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the MAX7219 ISET pin?
The ISET pin has a pull-up to 5V on 37 of 45 designs, most often 10 kΩ (then 22 kΩ). Counted from the KiCad layouts of 45 open source designs using the MAX7219.
What parts are used alongside the MAX7219?
The USBLC6-2SC6, RP2040, 74HC14, AMS1117-3.3 and ATMEGA328P-AU appear in the most repositories here.
Which microcontrollers do boards using the MAX7219 use?
Most are built on AVR/Arduino (12), RP2040/RP2350 (7), ESP32 (5) and STM32 (4).
How big is a typical board using the MAX7219?
The median is 100 × 81.5 mm, and 85% are two-layer designs.
What is the most popular open source board using the MAX7219?
By GitHub stars, OpenDeck r3.1.2 by shanteacontrols, with 956 stars.
Can I simulate one of these boards using the MAX7219 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.