Tinysimpleled
jeffc·nrf52-watch-obsolete·kicad/watch-mk2/tinysimpleled/tinysimpleled.kicad_pcb
About the Tinysimpleled PCB
Tinysimpleled is an open source PCB design by jeffc, published on GitHub. It is a 2-layer board measuring 13 × 6 mm, with 3 components from 3 distinct parts.
By type, the board carries 1 connector, 1 diode and 1 resistor.
It belongs with the wearables, power & battery and displays & leds designs in this gallery.
From the project
obsolete repository - see https://github.com/jeffc/nrf52-watch-firmware
This repo is, at present, a work-in-progress playground for designing and building a smartwatch based on the nrf52840 microcontroller from Nordic.
RayTac MDBT50Q nRF52840 Module Main brains. nRF52840 chipset chosen for BLE capability and low (<1uA) sleep current. This is the module used in the Sparkfun Breakout Sharp LS018B7DH02 1.8" Memory LCD with FLExLight Frontlight Always-on display. Chosen for size and small power consumption. The LS018B7DH02 isn't sold directly by Sharp, and no datasheet is currently available. Unknowns are currently Does the display require 3.3V or 5V power? Does…
Tinysimpleled bill of materials (BOM)
3 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x02_Female | PinHeader_1x02_P1.00mm_Vertical | J1 |
| 1 | LED | XM-L2 | D1 |
| 1 | R | R_2512_6332Metric | R1 |
Tinysimpleled design files
The KiCad project lives in the jeffc/nrf52-watch-obsolete repository on GitHub; these links point at the commit this page was built from.
Tinysimpleled: common questions
How big is the Tinysimpleled PCB?
The Tinysimpleled measures 13 × 6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Tinysimpleled?
3 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Tinysimpleled design files?
From the jeffc/nrf52-watch-obsolete repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Tinysimpleled design in my own project?
The repository has no license, so all rights stay with jeffc. Use it as a reference, and ask the author before reusing the design.
More boards in nrf52-watch-obsolete
Nordic nRF
Mk2
jeffc
23.5 × 37.5 mm49 parts2LNo license6Watch
jeffc
41 × 23 mm42 parts2LNo license6Watch old
jeffc
35.6 × 25.4 mm38 parts2LNo license6Panel
jeffc
25.4 × 25.4 mm35 parts2LNo license6Watch logic
jeffc
25.4 × 25.4 mm27 parts2LNo license6Watch power
jeffc
25.4 × 16.3 mm17 parts2LNo license6Flex
jeffc
33.6 × 41.5 mm8 parts2LNo license6Wrist
jeffc
36 × 7 mm6 parts2LNo license6Dock
jeffc
34 × 17 mm4 parts2LNo license6Backplate
jeffc
28 × 35 mm3 parts2LNo license6
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k