HardLabs

Panel

jeffc·nrf52-watch-obsolete·kicad/watch/panel.kicad_pcb

Panel PCB layout, top view — open source board by jeffc

About the Panel PCB

Panel is an open source PCB design by jeffc, published on GitHub. It is a 2-layer board measuring 25.4 × 25.4 mm, with 35 components from 25 distinct parts.

Other key parts include the 113990582, M41T62LC6F, W25X20CLUXIG, MCP73831-2-OT and TPS63001. By type, the board carries 10 resistors, 6 ICs, 6 connectors, 4 capacitors, 2 transistors and 2 inductors.

It belongs with the wearables, power & battery and displays & leds designs in this gallery.

From the project

obsolete repository - see https://github.com/jeffc/nrf52-watch-firmware

This repo is, at present, a work-in-progress playground for designing and building a smartwatch based on the nrf52840 microcontroller from Nordic.

RayTac MDBT50Q nRF52840 Module Main brains. nRF52840 chipset chosen for BLE capability and low (<1uA) sleep current. This is the module used in the Sparkfun Breakout Sharp LS018B7DH02 1.8" Memory LCD with FLExLight Frontlight Always-on display. Chosen for size and small power consumption. The LS018B7DH02 isn't sold directly by Sharp, and no datasheet is currently available. Unknowns are currently Does the display require 3.3V or 5V power? Does…

Main components on the Panel

113990582M41T62LC6FW25X20CLUXIGMCP73831-2-OTTPS63001TPS61222DCK

Panel bill of materials (BOM)

35 components, 25 distinct parts.

QtyPartRefs
1
113990582
IC1
1
M41T62LC6F
IC2
1
W25X20CLUXIG
U1
1
MCP73831-2-OT
U2
1
TPS63001
U3
1
TPS61222DCK
U4
2
DMN6140L
Q1, Q2
1
Crystal
Y1
2
Conn_01x04_Female
J1, J2
1
Buzzer
J3
1
Memory LCD
J4
1
Conn_01x04_Female
J5
1
AXT610124
P1
1
Battery_Cell
BT1
2
SW_Push
SW_BOOT1, SW_RESET1
1
D_Schottky
D1
1
2.2uH
L1
1
4.7 uH
L2
1
11mF
C1
1
1uF
C2
Show 5 more
QtyPartRefs
2
22uF
C3, C4
2
27
R1, R2
2
10k
R3, R4
2
4k7
R5, R6
4
R
R7, R8, R9, R10

Panel design files

The KiCad project lives in the jeffc/nrf52-watch-obsolete repository on GitHub; these links point at the commit this page was built from.

Panel: common questions

How big is the Panel PCB?

The Panel measures 25.4 × 25.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Panel?

35 components, from 25 distinct parts. The full bill of materials is listed on this page.

Where can I download the Panel design files?

From the jeffc/nrf52-watch-obsolete repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Panel design in my own project?

The repository has no license, so all rights stay with jeffc. Use it as a reference, and ask the author before reusing the design.

More boards in nrf52-watch-obsolete

Similar boards