Adapterboard A
jensboe·Modellbahn·adapater_a/adapater_a.kicad_pcb
About the Adapterboard A PCB
Adapterboard A is an open source PCB design by jensboe, published on GitHub. It is a 2-layer board measuring 53.3 × 99.8 mm, with 57 components from 34 distinct parts.
Other key parts include the TPS5430DDA, TLV2372 and L6226. By type, the board carries 16 resistors, 15 capacitors, 9 diodes, 7 connectors, 5 jumpers and 3 ICs.
Main components on the Adapterboard A
Adapterboard A bill of materials (BOM)
57 components, 34 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS5430DDA | TI_SO-PowerPAD-8_ThermalVias | U101 |
| 1 | TLV2372 | SOIC-8_3.9x4.9mm_P1.27mm | U102 |
| 1 | L6226 | UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm | U301 |
| 2 | CONN_01X03 Conn_01x03 | TerminalBlock_4Ucon_1x03_P3.50mm_Vertical | J101, J201 |
| 1 | CN8 | PinHeader_2x08_P2.54mm_Vertical | J102 |
| 1 | CN9 | PinHeader_2x15_P2.54mm_Vertical | J103 |
| 1 | CN7 | PinHeader_2x10_P2.54mm_Vertical | J104 |
| 1 | CN10 | PinHeader_2x17_P2.54mm_Vertical | J105 |
| 1 | CONN_01X06 Conn_01x06 | TerminalBlock_4Ucon_1x06_P3.50mm_Vertical | J202 |
| 5 | JUMPER_3_BRIDGED12 Jumper_3_Bridged12 | PinHeader_1x03_P2.54mm_Vertical | JP101, JP102, JP103, JP105, JP106 |
| 1 | SW_DIP_X10 SW_DIP_x10 | SW_DIP_SPSTx10_Slide_KingTek_DSHP10TS_W7.62mm_P1.27mm | SW101 |
| 1 | KBL406 | Diode_Bridge_Vishay_KBL | D101 |
| 2 | B340 | D_SMA | D102, D103 |
| 2 | C2297 gr | LED_0805_2012Metric | D104, D107 |
| 1 | C84256 red | LED_0805_2012Metric | D105 |
| 1 | C2296 yl | LED_0805_2012Metric | D106 |
| 2 | 1N4148W | D_SOD-123 | D301, D302 |
| 1 | 47U 47u | L_Ferrocore_DLG-0504 | L101 |
| 4 | 4M7 4m7 | CP_Radial_D18.0mm_P7.50mm | C101, C102, C103, C104 |
| 1 | 10U 10u | CP_Elec_6.3x5.4 | C105 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 10N 10n | C_0805_2012Metric | C106, C109, C110, C304 |
| 1 | 220U 220u | C_Elec_10x10.2 | C107 |
| 2 | 100N 100n | C_0805_2012Metric | C108, C303 |
| 1 | 5N6 5n6 | C_0805_2012Metric | C301 |
| 1 | 100U 100u | CP_Elec_6.3x5.4 | C302 |
| 1 | 10N 220n | C_0805_2012Metric | C305 |
| 3 | 10K 10k | R_0805_2012Metric | R101, R105, R106 |
| 1 | 1K2 1k2 | R_0805_2012Metric | R102 |
| 1 | 0R1 | R_1206_3216Metric | R103 |
| 3 | 68K 68k | R_0805_2012Metric | R104, R112, R113 |
| 1 | 820 | R_0805_2012Metric | R107 |
| 4 | 150 | R_0805_2012Metric | R108, R109, R110, R111 |
| 1 | 100K 100k | R_0805_2012Metric | R301 |
| 2 | 1K2 5k | R_0805_2012Metric | R302, R303 |
Adapterboard A design files
The KiCad project lives in the jensboe/Modellbahn repository on GitHub; these links point at the commit this page was built from.
Adapterboard A: common questions
How big is the Adapterboard A PCB?
The Adapterboard A measures 53.3 × 99.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Adapterboard A?
57 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Adapterboard A design files?
From the jensboe/Modellbahn repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Adapterboard A design in my own project?
The repository has no license, so all rights stay with jensboe. Use it as a reference, and ask the author before reusing the design.