14 open source boards using the TLV2372
Real designs built with the TLV2372, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
BatteryAnalyzer MkII
Moragor
101.6 × 53.3 mm25 parts2LMIT12Educational resonant demo
robertsmatt97
94.6 × 105.3 mm85 parts4LNo license1Pwm generator
Kibabalu
56.6 × 57.7 mm32 parts2LNo license1Microchip SAM
DATA Switcher
twfth9
100 × 100 mm667 parts4LGPL-3.00RP2040/RP2350
Spacescape
Napkin-to-Billboard
205 × 140 mm327 parts4LMIT04phaseshift
Saatvik-Aggarwal
61 × 70 mm139 parts4LMIT0ESP32
Engine-Simulator-2.0
koolcat6666
100 × 100 mm58 parts2LMIT0Adapterboard A
jensboe
53.3 × 99.8 mm57 parts2LNo license0STM32
STM-32 Based Waveform Generator
devjamescollier
52 × 48 mm48 parts2LCERN-OHL-P-2.00BuckConverter
devanshjoshi08
138 × 102.5 mm37 parts2LNo license0AutoPCB demo code
pranalisree
100 × 80 mm13 parts2LNo license0ESP32
Sigma Spaceship - second try
Napkin-to-Billboard
123 × 55 mm114 parts4LMIT0SwitchedPhaseShift
Saatvik-Aggarwal
30 × 85 mm80 parts4LMIT0STM32
Mini df player
Chirag-Vadrali
80 × 42 mm66 parts4LNo license1
How designs wire the TLV2372
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the TLV2372 connects to, and the resistors, capacitors and other passives placed on it.
- The V- pin is tied to GND on 10 of 11 designs.
- Pin 1 has a series resistor on 8 of 11 designs, most often 100 kΩ (then 4.7 kΩ).
- The - pins have a series resistor on 8 of 11 designs, most often 10 kΩ (then 68 kΩ).
- Pin 7 has a series resistor on 7 of 11 designs, most often 68 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: Signal 91% |
|
| -pin 2, 6 | Connected to: Signal 82% · not connected 18% |
|
| +pin 3, 5 | Connected to: Signal 77% · not connected 18% |
|
| V-pin 4 | Connected to: GND 91% | — |
| Pin 7 | Connected to: Signal 73% · not connected 27% |
|
| V+pin 8 | Connected to: 5V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BatteryAnalyzer MkII by Moragor, Mini df player by Chirag-Vadrali, Pwm generator by Kibabalu and Educational resonant demo by robertsmatt97.
The TLV2372 in open source designs
The gallery holds 14 open source boards using the TLV2372 from 12 GitHub repositories; a typical one measures about 97.3 × 82.5 mm and carries around 62 components.
50% are two-layer designs, the rest use four layers or more, and 57% carry an open source license.
The most starred is BatteryAnalyzer MkII by Moragor.
Microcontrollers on boards using the TLV2372
What boards using the TLV2372 are built for
TLV2372: common questions
Where can I find a TLV2372 reference design?
Each of the 14 boards on this page is a real design using the TLV2372. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TLV2372 V- pin connected?
The V- pin is tied to GND on 10 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the TLV2372.
What resistor goes on the TLV2372 pin 1?
Pin 1 has a series resistor on 8 of 11 designs, most often 100 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 11 open source designs using the TLV2372.
What resistor goes on the TLV2372 - pin?
The - pins have a series resistor on 8 of 11 designs, most often 10 kΩ (then 68 kΩ). Counted from the KiCad layouts of 11 open source designs using the TLV2372.
Which microcontrollers do boards using the TLV2372 use?
Most are built on ESP32 (2), STM32 (2), RP2040/RP2350 (1) and Microchip SAM (1).
How big is a typical board using the TLV2372?
The median is 97.3 × 82.5 mm, and 50% are two-layer designs.
What is the most popular open source board using the TLV2372?
By GitHub stars, BatteryAnalyzer MkII by Moragor, with 12 stars.
Can I simulate one of these boards using the TLV2372 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.