SRBOB
jensenr30·cad·kicad4/SRBOB/SRBOB.kicad_pcb
About the SRBOB PCB
SRBOB is an open source PCB design by jensenr30, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 19 components from 11 distinct parts.
Other key parts include the TLV2374, LM7805_TO220 and 74LS595. By type, the board carries 5 capacitors, 4 ICs, 4 connectors and 4 resistors.
From the project
Schematics, PCBs, Simulations, ...
I usually generate .pdf files for all my schematics and Gerber files once they are finished, so I can often view my schematics and layouts without having to install KiCad or gerbv.
Main components on the SRBOB
SRBOB bill of materials (BOM)
19 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLV2374 74HC595 | DIP-16_W7.62mm | U1 |
| 1 | LM7805_TO220 74LS595 | DIP-16_W7.62mm | U2 |
| 2 | 74LS595 | DIP-16_W7.62mm | U3, U4 |
| 3 | CONN_01X08 | Pin_Header_Straight_1x08_Pitch2.54mm | J1, J2, J3 |
| 1 | NMJ6HHD2 CONN_01X08 | Pin_Header_Straight_1x08_Pitch2.54mm | J4 |
| 2 | CONN_01X08 | Pin_Header_Straight_1x08_Pitch2.54mm | J_IN1, J_OUT1 |
| 2 | 10U 100n | C_0603 | C1, C3 |
| 2 | 100N 100n | C_0603 | C2, C4 |
| 1 | 10N 10u | CP_Tantalum_Case-B_EIA-3528-21_Wave | C5 |
| 2 | 100K 1 | R_0603 | R1, R2 |
| 2 | 1 | R_0603 | R3, R4 |
SRBOB design files
The KiCad project lives in the jensenr30/cad repository on GitHub; these links point at the commit this page was built from.
SRBOB: common questions
How big is the SRBOB PCB?
The SRBOB measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SRBOB?
19 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SRBOB design files?
From the jensenr30/cad repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the SRBOB design in my own project?
The repository has no license, so all rights stay with jensenr30. Use it as a reference, and ask the author before reusing the design.