14 open source boards using the 74LS595
Real designs built with the 74LS595, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PIC
Lens
ervanalb
80 × 80 mm53 parts4LNo license515AVR/Arduino
Diymetro
tomarus
162.8 × 100 mm115 parts2LNo license27New enet
jayacotton
254 × 134.6 mm36 parts2LMIT21STM32
R2RDAC2026 REVIZE II
ERDALECE
246 × 120 mm919 parts6LGPL-3.05RP2040/RP2350
Painel pcb1
ArqueologiaDigital
91.4 × 119.4 mm59 parts2LNo license4AVR/Arduino
Podregilo mainboard
johannes-mueller
139.7 × 83.8 mm70 parts2LGPL-2.03WZ80 IO Board
makesthingsxyz
74.9 × 110.5 mm22 parts2LMIT3Arduino eeprommer
tmssngr
61 × 54.6 mm23 parts2LNo license2- schematic only · 34 parts
S100 enet
jayacotton
34 parts2LMIT21 ALU0
Left-Hand
100 × 100 mm66 parts2LNo license19External drive board
MEGA65
100 × 100 mm30 parts2LNo license7AVR/Arduino
Painel pcb2
ArqueologiaDigital
91.4 × 119.4 mm53 parts2LNo license4128 X 16 RAM V4 FINAL
ibm2030
180 × 95 mm108 parts4LNo license13SRBOB
jensenr30
100 × 100 mm19 parts2LNo license1
How designs wire the 74LS595
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the 74LS595 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 5 of 12 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 8 | Connected to: GND 92% | — |
| VCCpin 16 | Connected to: VCC 100% |
|
14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Lens by ervanalb, Diymetro by tomarus, New enet by jayacotton and ALU0 by Left-Hand.
The 74LS595 in open source designs
The gallery holds 14 open source boards using the 74LS595 from 12 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 53 components.
79% are two-layer designs, the rest use four layers or more, and 36% carry an open source license.
The most starred is Lens by ervanalb.
Microcontrollers on boards using the 74LS595
What boards using the 74LS595 are built for
74LS595: common questions
Where can I find a 74LS595 reference design?
Each of the 14 boards on this page is a real design using the 74LS595. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LS595 VCC pin?
The VCC pin has a decoupling capacitor on 5 of 12 designs, most often 100 nF. Counted from the KiCad layouts of 12 open source designs using the 74LS595.
What parts are used alongside the 74LS595?
The 74LS138, 74LS165, 74LS04, 74LS00 and 74LS245 appear in the most repositories here.
Which microcontrollers do boards using the 74LS595 use?
Most are built on AVR/Arduino (3), PIC (1), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the 74LS595?
The median is 100 × 100 mm, and 79% are two-layer designs.
What is the most popular open source board using the 74LS595?
By GitHub stars, Lens by ervanalb, with 515 stars.
Can I simulate one of these boards using the 74LS595 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.