Relay bypass
jer-lil·relay-bypass·relay-bypass-single-jack/relay-bypass-single-jack.kicad_pcb
About the Relay bypass PCB
Relay bypass is an open source STM32 PCB design by jer-lil, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 57 × 37 mm, with 48 components from 32 distinct parts.
Its main chip is the STM32C011F4Ux, from the STM32 family. Other key parts include the TLV76701DRVR, TLP170AM and LM317LCPK. By type, the board carries 17 capacitors, 14 resistors, 4 ICs, 4 connectors, 3 transistors and 3 diodes.
From the project
https://kicanvas.org/?repo=https://github.com/jer-lil/relay-bypass/blob/main/relay-bypass-single-jack%2Frelay-bypass-single-jack.kicad_sch
Main components on the Relay bypass
Relay bypass bill of materials (BOM)
48 components, 32 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLV76701DRVR TI | WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U1 |
| 1 | STM32C011F4Ux | ST_UFQFPN-20_3x3mm_P0.5mm | U2 |
| 1 | TLP170AM Toshiba | SO-4_4.4x3.9mm_P2.54mm | U3 |
| 1 | LM317LCPK TI | SOT-223 | U4 |
| 1 | DMP3099L Diodes | SOT-23 | Q1 |
| 2 | DMN62D0U-7 Diodes | SOT-23 | Q2, Q3 |
| 1 | PJ-051A 3 Same Sky (Formerly CUI Devices) | BarrelJack_CUI_PJ-051A | J1 |
| 2 | AudioJack3_Switch | Jack_6.35mm_Neutrik_NMJ6HCD2_LARGE_SLOTS | J3, J4 |
| 1 | Conn_Coaxial_Small | U.FL_Hirose_U.FL-R-SMT-1_Vertical | J5 |
| 2 | Jumper_2_Small_Bridged | SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm | JP1, JP2 |
| 1 | UD2-3NU IM05JR Kemet | UD23NU | K1 |
| 1 | SMF4L9.0A Littelfuse Inc. | D_SOD-123F | D1 |
| 1 | QBLP595-R5 Red QT Brightek | LED_0402_1005Metric | D2 |
| 1 | PMEG4010CEAX Nexperia | D_SOD-323 | D3 |
| 3 | C0805C105K3RACTU 1u Kemet | C_0805_2012Metric | C1, C10, C14 |
| 1 | EEE-FK1E470P 47u Panasonic | CP_Elec_6.3x5.8 | C2 |
| 1 | C1206C225K3RACTU 2.2u Kemet | C_1206_3216Metric | C3 |
| 7 | C0402C104K3RACTU 100n Kemet | C_0402_1005Metric | C4, C5, C11, C12, C13, C15, C17 |
| 1 | C0402C103K3RACTU 10n Kemet | C_0402_1005Metric | C6 |
| 1 | GRM1555C1H100GA01D 10p Murata | C_0402_1005Metric | C7 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C0402C223K3RACTU 22n Kemet | C_0402_1005Metric | C8 |
| 1 | C0402C224K3RACTU 220n Kemet | C_0402_1005Metric | C9 |
| 1 | C1206C475K3RACTU 4.7u Kemet | C_1206_3216Metric | C16 |
| 1 | RT0402BRD07100KL 100k Yageo | R_0402_1005Metric | R1 |
| 1 | RT0402BRD0733KL 33k Yageo | R_0402_1005Metric | R2 |
| 1 | RT0402BRD0712KL 12k Yageo | R_0402_1005Metric | R3 |
| 1 | RT0402BRD07470RL 470 Yageo | R_0402_1005Metric | R4 |
| 6 | RT0402BRD071KL 1k Yageo | R_0402_1005Metric | R5, R7, R8, R10, R11, R13 |
| 1 | MFR-25FBF52-3K3 3.3k Yageo | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.5mm_Horizontal | R6 |
| 1 | RT0603BRD073K3L 3.3k Yageo | R_0603_1608Metric | R9 |
| 1 | RL0510S-3R3-F 3.3 Susumu | R_0402_1005Metric | R12 |
| 1 | RT0402BRD07330RL 330 Yageo | R_0402_1005Metric | R14 |
Relay bypass design files
The KiCad project lives in the jer-lil/relay-bypass repository on GitHub; these links point at the commit this page was built from.
Relay bypass: common questions
What microcontroller does the Relay bypass use?
The Relay bypass is built around the STM32C011F4Ux, from the STM32 family.
How big is the Relay bypass PCB?
The Relay bypass measures 57 × 37 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Relay bypass?
48 components, from 32 distinct parts. The full bill of materials is listed on this page.
Where can I download the Relay bypass design files?
From the jer-lil/relay-bypass repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Relay bypass design in my own project?
Yes, under the terms of its GPL-3.0 license, which jer-lil chose for the repository.
Can I test firmware for the Relay bypass without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k