2 open source boards using the TLP170AM
Real designs built with the TLP170AM, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
XBT Autolauncher 3.0
cxs1529
310 × 100 mm216 parts2LNo license0STM32
Relay bypass
jer-lil
57 × 37 mm48 parts4LGPL-3.00
The TLP170AM in open source designs
The gallery holds 2 open source boards using the TLP170AM from 2 GitHub repositories; a typical one measures about 183.5 × 68.5 mm and carries around 132 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is XBT Autolauncher 3.0 by cxs1529.
Microcontrollers on boards using the TLP170AM
TLP170AM: common questions
Where can I find a TLP170AM reference design?
Each of the 2 boards on this page is a real design using the TLP170AM. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TLP170AM use?
Most are built on STM32 (2).
How big is a typical board using the TLP170AM?
The median is 183.5 × 68.5 mm, and 50% are two-layer designs.
What is the most popular open source board using the TLP170AM?
By GitHub stars, XBT Autolauncher 3.0 by cxs1529, with 0 stars.
Can I simulate one of these boards using the TLP170AM before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.