Uno Shield ThermoPro
jhall8686·ENCE_3210_Jackson_Hall·KiCad Projects/Uno_Shield_ThermoPro/Uno_Shield_ThermoPro.kicad_pcb
About the Uno Shield ThermoPro
Uno Shield ThermoPro is an open source PCB design by jhall8686, published on GitHub. It is a 2-layer board measuring 68.6 × 53.3 mm, with 20 components from 13 distinct parts.
By type, the board carries 7 connectors, 6 resistors, 5 switches and 1 diode.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Microprocessor Systems Projects (Code and PCB Designs)
The primary project in this repository is the ThermoPro Thermometer Probe, a clone of an actual product implemented on a PCB shield. All of the PCB docs and firmware can be found here.
Uno Shield ThermoPro bill of materials (BOM)
20 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Power | PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | Digital/PWM | PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | Analog | PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | Digital/PWM | PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | CONN_GYRO | PinSocket_1x08_P2.54mm_Vertical | J5 |
| 1 | Connector Display | PinSocket_1x04_P2.54mm_Vertical | J6 |
| 1 | CONN_TEMP | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J7 |
| 1 | R_Potentiometer | Potentiometer_Bourns_3386P_Vertical | RV1 |
| 5 | SW_SPST | SW_PUSH_6mm | SW1, SW2, SW3, SW4, SW5 |
| 1 | LED | LED_D5.0mm | D1 |
| 4 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R6 |
| 1 | 2 x 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 3 x 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
Uno Shield ThermoPro design files
The KiCad project lives in the jhall8686/ENCE_3210_Jackson_Hall repository on GitHub; these links point at the commit this page was built from.
Uno Shield ThermoPro: common questions
How big is the Uno Shield ThermoPro?
The Uno Shield ThermoPro measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Uno Shield ThermoPro?
20 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Uno Shield ThermoPro design files?
From the jhall8686/ENCE_3210_Jackson_Hall repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Uno Shield ThermoPro design in my own project?
The repository has no license, so all rights stay with jhall8686. Use it as a reference, and ask the author before reusing the design.
More boards in ENCE_3210_Jackson_Hall
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979