NeptuneSDR-K210
JiaVerso·NeptuneSDR-K210
About the NeptuneSDR-K210 PCB
NeptuneSDR-K210 is an open source FPGA PCB design by JiaVerso, published on GitHub. It is a board, with 25 components from 16 distinct parts.
Its main chip is the XC7Z010_20-2CLG400, from the FPGA family. Other key parts include the W25Q256FVEIG and TCM811TERCTR. By type, the board carries 13 resistors, 3 ICs, 3 switches, 2 transistors, 2 diodes and 1 crystal.
From the project
NeptuneSDR K210: 11-sheet editable KiCad reconstruction, AI-friendly Markdown, BOM and conversion verification.
将 NeptuneSDR K210 原理图 PDF 转录为LLM可检索的 Markdown,并重建为编辑的 KiCad 8 工程。 K210 是板名;源图核心器件 U3 为 Zynq XC7Z01020-2CLG400`。
1. 下载或克隆完整仓库,保持子页文件与根页在同一目录。 2. 在 KiCad 8 中打开 NeptuneSDR-K210.kicadpro`,进入原理图编辑器。 3. 双击目录页中的相应子页,或使用原理图层次导航器切换。 4. 修改连线后重新导出网表、运行 ERC,并对照原 PDF。当前坐标保持源图版式,移动引脚时需保持连接端点重合。
- 156 个符号单元、147 个物理位号、1,439 个 PDF 可见引脚、527 个网络。 - 已在 KiCad 8.0.9 中打开并保存全部 12 页;保存后网表成员集合与几何提取模型比较 零差异。从源 PDF 重新执行脚本后网表对照也为零差异。 - ERC 尚未通过:3,593 项,统计与定位信息见验证报告。
Main components on the NeptuneSDR-K210
NeptuneSDR-K210 bill of materials (BOM)
25 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XC7Z010_20-2CLG400 | BGA400C80P20X20_1700X1700X160 | U3 |
| 1 | W25Q256FVEIG | W25Q256FVEIG | U8 |
| 1 | TCM811TERCTR | SOT-143-4 | U9 |
| 2 | BSS138LT1G | SOT23 | Q1, Q2 |
| 1 | 33.333MHZ 33.333MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | X1 |
| 1 | DSPV02LHGET | SW-TH_DSPV02LHGET | SW1 |
| 2 | PTCF-Q-T/R | SW-SMD_4P-L4.7-W3.5-P1.70-LS5.9 | SW2, SW3 |
| 1 | LED_BLUE | LED_0402_1005Metric | D1 |
| 1 | LED_GREEN | LED_0402_1005Metric | D3 |
| 1 | 104 | C_0402_1005Metric | C62 |
| 4 | 20K/1% | R_0402_1005Metric | R55, R60, R62, R64 |
| 1 | 33R | R_0402_1005Metric | R63 |
| 1 | 1K/1% | R_0402_1005Metric | R66 |
| 3 | 4.7K/1% | R_0402_1005Metric | R68, R69, R71 |
| 2 | 470R/1% | R_0402_1005Metric | R70, R73 |
| 2 | 10K/1% | R_0402_1005Metric | R72, R74 |
NeptuneSDR-K210 design files
The KiCad project lives in the JiaVerso/NeptuneSDR-K210 repository on GitHub; these links point at the commit this page was built from.
- Schematic04_Zynq_PS_boot_and_reset.kicad_sch
- Netlistdata/NeptuneSDR-K210.xml
- BOMdata/bom.csv
NeptuneSDR-K210: common questions
What microcontroller does the NeptuneSDR-K210 use?
The NeptuneSDR-K210 is built around the XC7Z010_20-2CLG400, from the FPGA family.
How many components are on the NeptuneSDR-K210?
25 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the NeptuneSDR-K210 design files?
From the JiaVerso/NeptuneSDR-K210 repository on GitHub, which has the schematic, a netlist and the BOM; the links under Design files point to each one.
Can I use the NeptuneSDR-K210 design in my own project?
The repository has no license, so all rights stay with JiaVerso. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the NeptuneSDR-K210 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.
Similar boards
FPGA
Base board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2kFPGA
Thunderscope Rev5.3
EEVengers
122.5 × 103.5 mm817 parts6LMIT1.3kFPGA
Usb sniffer
ataradov
58.2 × 38.1 mm86 parts2LBSD-3-Clause1.3kFPGA
Tomu, I'm
theacodes
13 × 9.4 mm40 parts4LMIT1.1kFPGA
Icepi zero
cheyao
65 × 30 mm143 parts4LSHL-2.1865FPGA
Gcvideo
ikorb
49 × 30 mm44 parts4LNo license765