HardLabs

Prrpls406-panel

jimktrains·prrpls·signalhead/prrpls406-panel.kicad_pcb

Prrpls406-panel PCB layout, top view — open source AVR/Arduino board by jimktrains

About the Prrpls406-panel PCB

Prrpls406-panel is an open source AVR/Arduino PCB design by jimktrains, published on GitHub under the AGPL-3.0 license. It is a 2-layer board measuring 48 × 48 mm, with 20 components from 5 distinct parts.

Its main chip is the ATTINY406-M, from the AVR/Arduino family. By type, the board carries 7 diodes, 7 resistors, 4 test points, 1 IC and 1 capacitor.

From the project

PRR Position Light Signal for N-Scale

Main components on the Prrpls406-panel

ATTINY406-M

Prrpls406-panel bill of materials (BOM)

20 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATTINY406-M
ATtiny406-M
U1
4
TestPoint
TP1, TP2, TP3, TP4
7
LED_Small_Filled
D1, D2, D3, D4, D5, D6, D7
1
0.1μF
C1
7
0
R1, R2, R3, R4, R5, R6, R7

Prrpls406-panel design files

The KiCad project lives in the jimktrains/prrpls repository on GitHub; these links point at the commit this page was built from.

Prrpls406-panel: common questions

What microcontroller does the Prrpls406-panel use?

The Prrpls406-panel is built around the ATTINY406-M, from the AVR/Arduino family.

How big is the Prrpls406-panel PCB?

The Prrpls406-panel measures 48 × 48 mm, has 2 copper layers and is 0.6 mm thick.

How many components are on the Prrpls406-panel?

20 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Prrpls406-panel design files?

From the jimktrains/prrpls repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Prrpls406-panel design in my own project?

Yes, under the terms of its AGPL-3.0 license, which jimktrains chose for the repository.

Can I test firmware for the Prrpls406-panel without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in prrpls

Similar boards