3 open source boards using the ATTINY406-M

Real designs built with the ATTINY406-M, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The ATTINY406-M in open source designs

The gallery holds 3 open source boards using the ATTINY406-M from 3 GitHub repositories; a typical one measures about 48 × 47.5 mm and carries around 39 components.

67% use four copper layers or more, and 67% carry an open source license.

The most starred is USB VSense by Meticulous-Technologies.

Microcontrollers on boards using the ATTINY406-M

What boards using the ATTINY406-M are built for

ATTINY406-M: common questions

Where can I find a ATTINY406-M reference design?

Each of the 3 boards on this page is a real design using the ATTINY406-M. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ATTINY406-M use?

Most are built on AVR/Arduino (2) and ESP32 (1).

How big is a typical board using the ATTINY406-M?

The median is 48 × 47.5 mm, and 33% are two-layer designs.

What is the most popular open source board using the ATTINY406-M?

By GitHub stars, USB VSense by Meticulous-Technologies, with 3 stars.

Can I simulate one of these boards using the ATTINY406-M before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part