MCP251863Breakout
jlpoltrack·MCP251863Breakout
About the MCP251863Breakout PCB
MCP251863Breakout is an open source PCB design by jlpoltrack, published on GitHub under the MIT license. It is a 2-layer board measuring 32 × 32 mm, with 15 components from 7 distinct parts.
Other key parts include the MCP251863T-H-SS and AMS1117-3.3. By type, the board carries 11 capacitors, 2 ICs, 1 crystal and 1 resistor.
It belongs with the rf & radio and dev boards & breakouts designs in this gallery.
From the project
CAN FD breakout: MCP251863 controller + transceiver on SPI (KiCad 10)
A CAN FD breakout: an MCP251863 (CAN FD controller with integrated transceiver) on SPI, with an onboard 3.3 V regulator and 120 Ω termination. All connections are solder pads.
Designed in KiCad 10. See SimpleCANBreakout for a classic-CAN transceiver-only board.
- MCP251863 CAN FD controller + transceiver (SSOP-28), SPI interface, STBY on its own pad - 4-pin crystal (Y1, 2016) for the controller clock - AMS1117 3.3 V LDO for VDD/VIO; transceiver VCC from +5V - 120 Ω termination resistor, always fitted - Parts on the top side only

Main components on the MCP251863Breakout
MCP251863Breakout bill of materials (BOM)
15 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP251863T-H-SS | SSOP-28_5.3x10.2mm_P0.65mm | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | CRYSTAL_GND24 Crystal_GND24 | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 4 | 10U 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C4, C10, C12 |
| 5 | 100N 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C5, C6, C7 |
| 2 | 10P 10p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C9 |
| 1 | 120 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R1 |
MCP251863Breakout design files
The KiCad project lives in the jlpoltrack/MCP251863Breakout repository on GitHub; these links point at the commit this page was built from.
- LayoutMCP251863Breakout.kicad_pcb
- SchematicMCP251863Breakout.kicad_sch
- BOMproduction/bom.csv
MCP251863Breakout: common questions
How big is the MCP251863Breakout PCB?
The MCP251863Breakout measures 32 × 32 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MCP251863Breakout?
15 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MCP251863Breakout design files?
From the jlpoltrack/MCP251863Breakout repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MCP251863Breakout design in my own project?
Yes, under the terms of its MIT license, which jlpoltrack chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979