Slimarm classic 2416

jlywxy·slimarm·board/slimarm_apricot/misc/cls_apr_pcb/slarm_cls_2416/slimarm_classic_2416.kicad_pcb

Slimarm classic 2416 PCB layout, top view — open source board by jlywxy

Simulate this board

About the Slimarm classic 2416 PCB

Slimarm classic 2416 is an open source PCB design by jlywxy, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 14.6 × 16.6 mm, with 3 components from 3 distinct parts.

Other key parts include the s3c2416, K4T1G164QJBCE7 and 3.3V.

From the project

custom-made boards of ARM processors

This part of the project "SlimARM" is making "minimum" (small-dimension and low-cost) S3C2416X ARM9 processor and Linux development board.

1. HCLK(DDRCLK/2) is ok for maximum below 200 MHz. However, clock over 200 MHz is not available, since DDR2 CAS=3 supports maximum 200 MHz(5 ns). This is known in all DDR2 devices which supports CAS=3. When DDRCLK=400 MHz, clock for SDCK pin is 200 MHz, DDR2 runs at 400 Mbps.

Main components on the Slimarm classic 2416

s3c2416 K4T1G164QJBCE7 3.3V

Slimarm classic 2416 bill of materials (BOM)

3 components, 3 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	s3c2416	s3c2416	U1
1	K4T1G164QJBCE7	K4T1G164QF-BCE7	U2
1	3.3V K9F5608U0C	M29W640FB70N6E	U3

Slimarm classic 2416 design files

The KiCad project lives in the jlywxy/slimarm repository on GitHub; these links point at the commit this page was built from.

Slimarm classic 2416: common questions

How big is the Slimarm classic 2416 PCB?

The Slimarm classic 2416 measures 14.6 × 16.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Slimarm classic 2416?

3 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Slimarm classic 2416 design files?

From the jlywxy/slimarm repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Slimarm classic 2416 design in my own project?

Yes, under the terms of its GPL-2.0 license, which jlywxy chose for the repository.

More boards in slimarm