Slimarm almond b
About the Slimarm almond b PCB
Slimarm almond b is an open source PCB design by jlywxy, published on GitHub under the GPL-2.0 license. It is a 4-layer board measuring 50 × 23.9 mm, with 70 components from 19 distinct parts.
Other key parts include the S3C2410AXX-YO, XC6206PxxxMR, 3.3V, HY57V561620FTP and K9F5608U0C. By type, the board carries 43 capacitors, 15 resistors, 5 ICs, 3 connectors, 3 diodes and 1 crystal.
From the project
custom-made boards of ARM processors
This part of the project "SlimARM" is making "minimum" (small-dimension and low-cost) S3C2410 ARM9 processor and Linux development board.
Main components on the Slimarm almond b
Slimarm almond b bill of materials (BOM)
70 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | S3C2410AXX-YO | BGA272C80P17X17_1400X1400X116 | IC1 |
| 1 | XC6206PxxxMR | SOT-23 | U2 |
| 1 | 3.3V XC6206PxxxMR | SOT-23 | U3 |
| 1 | HY57V561620FTP | HY57V561620FTP | U4 |
| 1 | K9F5608U0C | M29W640FB70N6E | U5 |
| 1 | 12MHz | Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 2 | DF13A-7P-1.25H21 | DF13A-7P-1.25H21 | J2, J3 |
| 3 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3 |
| 2 | 4.7PF 5pF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2 |
| 39 | 100NF 100nF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3, C4, C7, C8, C9, C10, C13, C14 +31 |
| 2 | 22PF 22pF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C6, C12 |
| 2 | 1.5k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R10 |
| 5 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R14, R15, R16, R17 |
| 1 | NC | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 3 | 5.6k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R6 |
| 2 | 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9 |
| 1 | 470k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | 0 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13 |
Slimarm almond b design files
The KiCad project lives in the jlywxy/slimarm repository on GitHub; these links point at the commit this page was built from.
Slimarm almond b: common questions
How big is the Slimarm almond b PCB?
The Slimarm almond b measures 50 × 23.9 mm, has 4 copper layers and is 4.69 mm thick.
How many components are on the Slimarm almond b?
70 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Slimarm almond b design files?
From the jlywxy/slimarm repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Slimarm almond b design in my own project?
Yes, under the terms of its GPL-2.0 license, which jlywxy chose for the repository.
More boards in slimarm
Slimarm hypericum
50 × 33.5 mm126 parts4LGPL-2.00
Slarm zero awa20.1
49.9 × 40.7 mm124 parts4LGPL-2.00
Us3c
64.6 × 39.2 mm90 parts4LGPL-2.00
Slimarm classic 2410
49.3 × 40.8 mm86 parts4LGPL-2.00
Slimarm carambola
50 × 39.9 mm84 parts4LGPL-2.00
Slimarm almond
48.2 × 34.6 mm81 parts4LGPL-2.00
STM32Ublaster jtag
38.3 × 13.4 mm22 parts2LGPL-2.00
Slimarm classic 2416
14.6 × 16.6 mm3 parts2LGPL-2.00