BNO085
jo5huajohn·BNO085-PCB
About the BNO085 PCB
BNO085 is an open source PCB design by jo5huajohn, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 28.6 × 25 mm, with 22 components from 13 distinct parts.
Other key parts include the BNO08X. By type, the board carries 10 resistors, 5 capacitors, 3 connectors, 1 IC, 1 crystal and 1 switch.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
KiCad project files for a BNO085 breakout board.

Main components on the BNO085
BNO085 bill of materials (BOM)
22 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BNO08X | BNO08X_LGA | U1 |
| 1 | 32.768kHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | COMM PROTOCOL SELECT | PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | LEFT CONN | PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | RIGHT CONN | PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | RESET SWITCH | SW_SPST_TL3305A | SW1 |
| 1 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 2 | 22pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4 |
| 1 | 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 5 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R5, R6, R9, R10 |
| 1 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 4 | 2.2k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R7, R8 |
BNO085 design files
The KiCad project lives in the jo5huajohn/BNO085-PCB repository on GitHub; these links point at the commit this page was built from.
- LayoutBNO085.kicad_pcb
- SchematicBNO085.kicad_sch
BNO085: common questions
How big is the BNO085 PCB?
The BNO085 measures 28.6 × 25 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BNO085?
22 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the BNO085 design files?
From the jo5huajohn/BNO085-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the BNO085 design in my own project?
Yes, under the terms of its CC0-1.0 license, which jo5huajohn chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979